KATSU ToolsWater Booster Pump 120W, Auto Stop Start Automatic Pressure Control, Self Priming Suitable for Home and Garden Water Taps 151433

I bought 4-5 boosting pump before this, but this is the best one, very good size, very very good price, very good in Performance very quietmy advice if you need one, just buy this one you will not regret100% satisfy with this purchase

Early days, but once you get this little pump going it's a beast for the price. The way I've set mine up it draws from about 1.5 to 2 meters below the pump and gives out a pretty impressive flow at the outlet about a meter above the pump. Auto shuts off after the tap is closed.Only criticism would be the lead is short at around 50mm (that's not a typo only 5cm) from the machine, but it's super cheap for what you get. Connected it up to a RCBO inline.Also seller dispatched next day and was delivered by DPD with an hour delivery window texted in advance. Tops!

Just a couple of things/questions that some of you might be able to help me with. Overall the pump works brilliantly, however, when the tap is in the off position and the pump has stopped you can see the pressure dropping and after a couple of minutes the pump starts again to bring the pressure back up - there are no leaks and the tap is definitely closed properly- does anyone know how to fix this (or is it a fault). Also when the pump has been running for a few minutes it stops momentarily and then starts again - this happens even with a full header tank of over 600 litres - again if anyone could help that would be perfect (or again is this a fault)

I use it because I have very low pressure mains water, which fills a 1,000L tank, and then I use this water pump to pump from the tank to sink, shower, etc. in my cabin.I have noticed in the morning the first blasts of water through the pump are brownish, and after that it's fine and clear all day.The water from the tank is crystal clear, which I know because I use the water from it without the pump for various duties including filling drinks bottles when there isn't much stored electricity.

Just a couple of things/questions that some of you might be able to help me with. Overall the pump works brilliantly, however, when the tap is in the off position and the pump has stopped you can see the pressure dropping and after a couple of minutes the pump starts again to bring the pressure back up - there are no leaks and the tap is definitely closed properly- does anyone know how to fix this (or is it a fault). Also when the pump has been running for a few minutes it stops momentarily and then starts again - this happens even with a full header tank of over 600 litres - again if anyone could help that would be perfect (or again is this a fault) - S

Bought this to deal with a low water pressure issue in house, decent build, great auto-start/stop.

This pump looked to solve our water pressure problem, we had nothing but a trickle. Once installed we were happy as we could use the shower now, however there were some concerns. The impellers and housing was ferrous, which would leave a rusty coloured water if not used for a period of time. The unit didn't come with any noise reduction feet and even after siting it on some anti-vibration matting the unit was quite loud.The pressure adjustment mechanism is flawed and just when you think it's set to come on when the drop in pressure is detected then you turn off the tap, this would make the pump oscillate between on and off very quickly, when I removed the dust cover to see what was happening I could see the spring was poor quality and essentially the unit was stuck switching between on and off.After adjusting the screw it was near impossible to get it to be consistent, we found that the rubber bladder chamber had leaked the air out, so we pumped it back up to 30psi and the pump was stable for about a week until the entire process happened again.Now after having to repeat this process 4 times, and the pump not shutting off it has caused a leak in the speed fit plumbing due to the pressure build up and now after repeating the adjustment procedure again the pump just hums, no increase in pressure at all, it's as if the motor has stalled.This pump looked the part when new, but in practice it's build quality is poor and it's not built to last.The only reason I have given it 2 stars instead of 1 was that it did work initially out of the box, and very well, but slowly the issues crept in after only 3 weeks of normal use.I will not be ordering a new unit and I can't see anyway to contact the manufacturer to complain.

I have the pump 1 month, using it everyday. Takes about 2 minutes to prime from completely empty with 3m intake hose. Good pressure to run a 50 meter garden hose. Takes 5 seconds to auto shut off after hose nozzle is shut off. Pump is top heavy, needs securing and is not very portable because of this. Intake and outlet are 1”BSP. Well packaged in box. English Instructions are poorly translated from Chinese. Power cable is very light gauge.