TPU-GRN-0.25KG1.75 SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Green)

This is my first experience with TPU and I would say it's gone very well. I've attached a video of the calibration cube I printed with this filament and I've left my print settings down below. It was printed with two perimeters and 15% grid infill and it can be squished in the fingers and will still conform to the pressure. This filament is strong but flexible. TPU is supposed to be very Hygroscopic and I think it's moist from the packaging because it seems to give me a slight bubbly consistency on the surfaces of my prints, so I'm gonna try to dehydrate it and I'll edit this comment to reflect on my experiences. EDIT: I was printing too high a temperature. Often TPU is printed at roughly 235c but I took this down to 210 and it prints a dream. Updating settings below to reflect mine which prints perfectly now! Sanding does scuff the side and makes it a little smoother. Ensure you use a bonding agent (glue stick, hairspray) on the PEI print surface if you're using a prusa as TPU can adhere to PEI far too well and you'll damage your bed. However, it prints just fine. It's very firm, can withstand a lot of pressure and the layers bond perfectly so it when it flexes they don't split. It flexes a lot! It's impressive! PrusaSlicer already has a preset for this filament which is great! Here's my print settings, for the Prusa Mini+ Speed: 15mm/s for everything but 40mm/s for bridging Layer height: First 0.3mm, the rest 0.2mm (you want less squish on that first layer) Perimeters: 2 Infill: 15%, grid pattern Extrusion multiplier: 1.15 (helps those layers bond well) Max volumetric speed: 1.8 Filament type: FLEX Extruder temp: 210c Bed temp: 50c Fan speed: 80%, 100% for bridges Seam alignment: nearest (probably reduces stringing) Top layers: 5 Bottom layers: 4 Retraction: completely disabled Avoid Crossing Perimeters: enabled (important for massively reducing stringing) Overall, I'm happy with this filament! It even prints well on a bowden system which is great! Gave a 4 because of the bubbly surfaces, hopefully it can be resolved! EDIT: Gave a 5 now because I can print perfectly smooth models with this stuff. It's amazing! Hope this helps... Happy printing :) x

First time trying to print with TPU very easy and excellent results first time, the picture doesn't do it justice and there has been NO post processing what you see is how it came off the printer. Printed on a CR10s with a BMG extruder and a E3D V6 all metal hotend set up as a direct drive, I used the following settings in Cura... Initial Layer Hight - 0.32 mm Layer Hight - 0.2 mm Infill - 20% Nozzle Temp - 215c Bet Temp - 50c All Flow set to 110% except Infill and Initial Layer which I left at 100% Print Speed - 40 mm/s Wall Speed - 20 mm/s Top/Bottom Speed - 20 mm/s Initial Layer Speed -15 mm/s Retraction Disabled Combing Mode - Not In Skin (helps to avoid stringing) I used 3DLac spray to help with adhesion and removal. A little expensive at normal price but even then worth it if you need a flexible print for a trial I bought it on sale so well worth it, would definitely recommend.

Very good quality filament, works really well after slowing print speed and disable retraction.

After printing for about 1/2 of the roll suddenly the printer stopped extruding. When I checked the diameter of the filament it had fallen to 1.4mm, too small for the extruder to grip onto. After unravelling about another 4m more of the filament I fount it to vary between 1mm and 1.5mm until it returned to 1.74mm. Thinking it was ok I returned to printing only to find out it was the same again later in the spool. I tried to contact the seller but no reply. Poor customer service. Otherwise when it was printing it was great. EDIT: the customer service team got back to me an very quickly offered to send me a replacement spool. Great customer service.

Prusa Slicer has a profile for this filament. I was wary of using TPU because of many negative comments on the Web. I was surprised how easily this filament printed. I set all speeds to 20mm/s and used the filament profile supplied and it just worked. Make sure to use a glue stick or equivalent to ease removal from the bed.

Really impressed by this filament. I was expecting jams or clogs, or at least having to recalibrate my printer a bit (Flashforge Finder, so not exactly built for it), but it worked perfectly first time (speed dialled down to 0.4) and has done numerous prints since without issue. The adhesion is great too, with no need for glue or tape. Love it!

Prints reliably

and can only assume the geometry of the item or slicing is the factor as all other parameters are similar

Excellent ! ce filament est très facile a imprimer

Super facil de imprimir con las configuraciones adecuadas.

Sehr gutes Filament. Sehr elastisch. Habe es auf einem Ender 3D Pro mit Standard Filamentzuführung und Standard Druckkopf gedruckt. Hat gut funktioniert. Ohne Probleme bei der Zufuhr. Das Bauteil ist absolut stabil. Die Lagen lassen sich nicht trennen (durch ziehen). Es ist auch schön elastisch. Das runde Teil von ca. 50 mm Durchmesser und zwei mm Wandstärke lässt sich komplett zusammendrücken und geht anschliessend wieder in seine Form zurück. Drucktemperatur 230 Grad, Druckbett 60 Grad, Geschwindigkeit 40 mm/s, Initial Layer 15 mm/s

No habia probado nunca este tipo de material y la verdad que no es facil de usar y le tienes que echar una cuantas horas de prueba antes de ponerte a imprimir las piezas finales. Al ser TPU puedes hacer muchas piezas que necesites flexibles. EL colo rojo es muy bonito y brillante. Recomiendo hacer torre de temperatura para saber la temperatura optima.

Muy bonito filamento, pero creo que necesita secarse ya que si tiene un poco de stringing, sain smart es una marca que la verdad no decepciona