G-PLUS 13 Row AN10-10AN Universal Aluminum Engine Transmission Oil Cooler Silver

Good cooler. Good build quality. Feel solid. Paint could be better. Used this to as part of the transmission cooler kit for my tundra since toyota decided to remove it. Works great. Temp is below 190F pretty much all the time. Haven’t tow with it. This was used on my 2021 tundra using oem thermostat and hardlines. Added a filter inline along with some braided hose. No leaks no issue.

5 stars! I used this on my 4wheeler for extra cooling and air flow for my engine. it worked like a charm, and this one is cheaper than most others like it. good quality and the listing details were all accurate. The black color looks better than the plain metal/aluminum look in my opinion too!

I bought this because my hoses on my ten row oil cooler had some damage on them from something I couldn’t identify, and I figured I might as well upgrade the rows since I was already going to redo and upgrade the hoses. I had an evil energy ten row and then upgraded with this to a 16 row. I have a 2018 Subaru wrx and oil temps matter quite a lot in the summer. With the ten row I dropped the temps about ten degrees, and with this one I dropped the temps about 15-20 depending on whether I’m idle or not. Honestly super worth the time and money to upgrade although I almost wish I got a 19. I ended up mounting it side ways in front of the radiator and using some random brackets and bolts I had from leftover projects. Everything bolted up great, and there was no leaks. I’m super interested to see how it fairs in 110 degree California summers but I’m gonna be a little more confident now thanks to this piece. Would recommend getting multilayered hoses, and also using loctite with said hoses. Would recommend to a friend.

Arrived fast and was magnificent packing and quality compared to all other poor quality I've used for cars at my shop hands down the best and most reliable person i will purchase from.

It keeps my TH350 cool in my LS Swap D150the fit and finish of the cooler look to be very good

I bought this as part of a DIY oil-cooler system for my car, purchased expressly because it was about the same size as the core from some full oil-cooler kits that I'd researched before deciding to pull the parts together myself. The finish of the core is pretty decent though you'll need to check in inlets and outlets to clean up any machining burs that may be left over.The AN10 fittings are welded to the core, you're not going to be able to change those out, that may or may not be an issue for you.The core seems to flow oil just fine. I'll up date if I find that it leaks or had other issues under hard use.

Thing worked well as an oil cooler on my 95 mustang GT drift car. You will obviously have to make a bracket to mount it. The mounting points on the cooler where easy to use and mount with a simple nut and bolt setup. Did have to tighten one of my fittings tighter than you'd think to get it to seal, but now no leaks. Haven't been able to test it on track yet to see how much of a difference it made on Temps.

i used this for a Power Steering cooler setup. worked out great! highly recommend!