TechDiamondTools Diamond Polishing Compound Kit of 5 Polishing Paste USA Made 5000 8000 14000 50000 100000 Grit for Marble Glass Metal Rock Jewelry Resin Silver Gemstone with 10% of Diamond Powder

I have a granite island top that had become very rough in some of the vein imperfections. I cleaned the top then used the water-thin super glue to fill some bad imperfections. I used regular sanding paper on pad with water to smooth out the super glue fillings. This brought to light some imperfections I missed with sanding powder. I cleaned and added more super glue to those areas and repeated the process. After this I first sanded my granite island top with various grit diamond pads up to 8000 grit using a sanding/polishing tool on #1 setting and occasionally spraying on water. Then I began with the 8000 grit polishing paste (without water) applied to wool polishing pad, polishing at #2-3 speed settings on my HF polishing tool. I polished around 10-15 minutes with each grit then cleaned the surface with soap and water between each grit. I polished using 8000, 14,000, 50,000, 100,000 and 200,000 grits and the counter looks like new after final cleaning. (Note of caution: For testing the complete sanding/polishing process, I used an old quartz top which had been cracked due to a hot griddle being left on too long. I had sealed the crack with super glue. When using the polishing compound on wool pads the surface got too hot and the crack popped open again. Be careful to allow cool down between each grit on quartz to prevent any tendency for quartz to crack!!)

This stuff is the real deal! I've used it on several small projects and it definitely removes small scratches and produces a great finish on the very high grit count. Thank you!

I mostly liked that you don't need a lot of paste to get an awesome polish. I ordered the wool pads and both combo boxes and also the 200,000 grit single tube and would highly recommend all of it.The only constructive criticism I could say is that the paste syringe can be tricky to eject a small amount. The paste at the end can be not as squeezable as the rest on the tube so as soon as that amount exits the syringe then the rest wants to follow easily.Also, not anything on the product but definitely wear vinyl/layex gloves to not get the paste or plating on your fingers.Overall 9/10 *'s

A little goes a long way, works well for polishing steel to mirror finish. Would recommend.

Stuffs works great! If you pair it with a dermal tool with a cloth wheel you are really cooking. Everything this polish touches shines, gets all the micro scratches out of my wedding ring I scratch up from work. I like how you can keep stepping up the grit to improve the finish even more. It's almost addictive using this stuff, I wanna see how shiny I can get things ahahahh.

Used it to polish a marble countertop. Works, but the diamond powder would be more suited for this job.Also, it is oil based, which means the surface gets immediately shiny once you spread the paste on it, not allowing you to see the progress.Next time, I'll buy the diamond powder

I had purchased a different polish that claimed it was the best polish. My first picture is of the item AFTER using that polish. I bought the diamond compound hoping for at least some improvement. Wasn’t expecting miracles, it was my first time making and sanding a resin sphere so I knew there were some errors on my end. The end result was a HUGE difference though. It went from foggy and difficult to see through to being able to see clear through it and pick out lots of details (air bubbles where I need to improve 😜).Spend the money and buy the compound! I used less than 1/2mil for each compound on this.

Lo usé para restaurar las reflextores de los faros tipo proyector de mi vehículo. Inicialmente estaba bastante deteriorada la superficie. Inicié con lijas al agua #80, luego #120, luego #240, #400, #600, #1500, #2000 y finalmente #2500. LUEGO DE LIJAR, usé este producto de 5 jeringas y estoy bastante contento con el resultado. Importante usar paño de microfibra para realizar el pulido (paño para limpieza de gafas o lentes) al menos 10 minutos con cada jeringa.