CURT 13615 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Lexus NX250, NX350, NX350h, NX450h+, Toyota RAV4, Venza

Perfect fit on NX250 2023. Installation was fairly simple too. No need of jack or second set of hands. I positioned the hitch underneath the car and tilted it so the the side tongues would slide into place without having to lift the entire hitch. Once the 2 front screws were in place, I lifted the back side and put the other 2 screws. I used a robber mallet to help me aline the back 2 screws. Entire process was about 30 minutes. I’m able to use my bike rack now. The hitch looks very well made and it fits the car perfectly. Highly recommend it.

This hitch fit our 2022 Toyota RAV4 Prime with no complications. Finish quality is excellent and the instructions were very clear about how to prepare the frame (have to remove plastic covers from the RAV4 tapped holes) and even provided explicit torque specifications. The only thing not listed in the instructions was that you need to remove the rear tow hook before installing the hitch. It will be obvious once you look under your RAV4 and it is held with only two bolts that were easy to remove. Overall I think it took me just 45 minutes to install the unit, doing it myself without assistance. The only caveat I will offer is that the receiver will be positioned rather low compared to most Class III hitches I've worked with in the past. Check your trailer's suggested tow height and make sure you get the correctly elevated receiver. In our case a 6" rise was needed.

I installed this Curt hitch receiver on our 2025 Toyota RAV4 Limited. I watched a couple videos on installing it before I started. They were helpful. The instructions included with the product and the videos all said you need to lower the muffler. I was able to install it without lowering the muffler. It is a tight squeeze but it worked. There is enough clearance under the RAV4 that I did not need to use ramps or anything else. The hitch receiver is a bit heavy but manageable. I installed by myself using a couple of small floor jacks to lift one side while trying to.align the holes. . Without those, I would have needed a second person. The install simply requires the included 4 bolts and washers. The holes matched up perfectly with the pre drilled and threaded holes. The alignment needs to be just right to get the bolts started. The bolts on the drivers side are easy to get to with a socket wrench and torque wrench. On the passenger side the space is too tight for anything but a regular wrench. Since I couldn’t get a torque wrench into the space, I had to just crank on the wrench until it thought it was probably good enough. The installation took me about an hour, including time spent watching a couple of how-to videos. We just plan to use it for attaching a bike rack, so I didn’t bother installing trailer wiring to go with this hitch receiver.

I installed this on my 2019 Toyota RAV4! Fits perfectly fine, very sturdy and looks good, it hides well. Paint is good. Bit tricky to install. Might need 2 people. Watch some videos.

25 RAV4 LE. Fits perfect, super easy install.

If you have the appropriate tools and someone to give you a hand, this is actually super simple to install yourself. I’d recommend using a jack/jack stands to elevate the car a little bit… I didn’t and it gets a little tight laying on the ground and being so close to the undercarriage and trying to maneuver, but it can definitely be done. All together maybe took me 30 minutes to get it installed and it’s VERY solid. Traveled 1,300 miles using it with a bike rack holding 2 bikes and no issues.

Another outstanding Curt product. The hitch fits perfectly on my 2022 Toyota Rav4 LE. Installation was about thirty minutes with no assistance from anyone. Also it's Made in The U.S.A. HELL YEAH!!! Highly recommend buying a 19mm ratcheting wrench for the installation.

I purchased this for a 2025 Toyota Rav4. Shipping was quick. The instructions were easy to follow, and the hitch mounted easily. The necessary hardware was included in the package, and the installation took me about an hour to complete. That included gathering the needed tools and putting the rear of the vehicle up on ramps to give me room to work.