ICM Controls ICM271 6 Inch Fan Blower Control OEM Replacement Carrier HH84AA020 HVAC Fan Control Compatible with HVAC Systems : desertcart.in: Home & Kitchen Review: The board is inexpensive, I keep a spare on hand since it fits so many of the furnaces I service. Before swapping boards, label any matching color wires with the corresponding terminal labels. Then take a bunch of pictures from multiple angles. Some older boards have some of the terminals in different positions than this replacement. Make sure that the wires go to matching terminals, not just matching locations on the new board. The thermostat terminals work better than the original, no need to hook the wires around the screw, they are secure under the square screw washer. Review: Works great. Original replacement. Very good price. I had the problem of the fan would turn off and on several times as the furnace was shutting down. One of the old relays was shot. This was the perfect solution to my problem. I probably aged $300-$400 getting this part and installing it myself.
| ASIN | B000TMK310 |
| Are batteries included? | No |
| Batteries | 1 Unknown batteries required. |
| Brand | ICM Controls |
| Compatible Devices | HVAC Systems |
| Cooling Method | forced air |
| Country of Origin | USA |
| Customer Reviews | 4.6 4.6 out of 5 stars (329) |
| Date First Available | 27 September 2016 |
| Global Trade Identification Number | 00800442000022 |
| Item Dimensions LxWxH | 15.2 x 15.2 x 15.2 Centimeters |
| Item Height | 6 Inches |
| Item Weight | 195 g |
| Item Width | 6 Inches |
| Item model number | ICM271 |
| Manufacturer | ICM Controls |
| Model number | ICM271 |
| Net Quantity | 1.0 Count |
| Product Dimensions | 15.24 x 15.24 x 15.24 cm; 195.04 g |
| UPC | 800442000022 700985101456 |
| Voltage | 24 Volts (AC) |
E**O
The board is inexpensive, I keep a spare on hand since it fits so many of the furnaces I service. Before swapping boards, label any matching color wires with the corresponding terminal labels. Then take a bunch of pictures from multiple angles. Some older boards have some of the terminals in different positions than this replacement. Make sure that the wires go to matching terminals, not just matching locations on the new board. The thermostat terminals work better than the original, no need to hook the wires around the screw, they are secure under the square screw washer.
F**R
Works great. Original replacement. Very good price. I had the problem of the fan would turn off and on several times as the furnace was shutting down. One of the old relays was shot. This was the perfect solution to my problem. I probably aged $300-$400 getting this part and installing it myself.
T**N
My aging Bryant furnace was acting up and I traced the problem to the control board (HH84AA011). I could not find a new original board but used ones are available. Turns out the ICM271 as a new replacement was actually cheaper than the best price I could find on a used original board. The board swap was easy and the ICM271's physical fit was perfect. There was one small issue during the install. The old board had a rigid metal jumper connection between the GAS1 and GAS3 terminals. However on the ICM271 board the spacing between the GAS1 and GAS3 terminals are slightly wider and therefore the rigid metal jumper from the old board was not reusable. I was able to make a new small jumper wire and the rest of the install was easy. The new ICM271 board works great and operates without issues.
S**N
It fixed my furnace fan issue. Instructions were good. Says the relays are solid state but they aren’t On the original board the big ice cube relays were made by Omron - this board, the relays are made by “Wong-Hong low brand”; wish these relays were made by tyco, omron, etc. Oh well price was right and it fixed my issue
A**R
The unit appears to be of better quality than the original. It installed quickly without any problems. The furnace has been working well since the new unit was installed. So the alternative is a new furnace?
Trustpilot
2 weeks ago
5 days ago
