Power Over Ethernet HAT PoE HAT with Metal Heatsink for Raspberry Pi 5, Onboard Cooling Fan, Supports 802.3af/at Network, 12V and 5V Power Outputs Easy for More Peripherals

The POE function of this product works well without any issue. Although the warning of a low voltage issue jumps out on the desktop screen of stupid Pi 5 Raspbian OS, I think it's the voltage detection issue of Pi 5 itself irrelevant to this product.

This PoE HAT comes with a slightly reduced size heat sink (to make room for the PoE HAT), so I had to remove my existing heat sink which had an integrated fan. It also comes with spacers for the four mount holes, but the problem is that I already had spacers underneath because of the M.2 SSD board. So you end up with two spacers with female ends on both sides trying to go together. It would have been nice if the PoE HAT (or the SSD board, to be fair) would come with an optional set of spacers that are male at one end so that (for example) the SSD board spacers with female ends would rest against the bottom of the RPi5 holes, and then the male end of the PoE spacers could screw into the SSD board spacers, and then the PoE HAT goes onto the other end of those spacers.As it is, since I don't have a case that fits all three components, the FrankenPi is just sitting out on top of my switch. And since I don't have spacers that will work for me, my PoE HAT is attached to the main board by its GPIO pass-throughs and the PoE plug. It's sturdy enough for something that isn't going to move around much, but if I were going to make this portable somehow, I'd probably put more of an effort into locking the components down.At any rate, functionally this HAT works great. as soon as I plugged it into a PoE switch (well, after I remembered to re-enable PoE on the ports I had disabled it on) it sprung to life and has been working great! Others mentioned potential issues with case fitting, unfortunately I can't speak to this because the M.2 board on the bottom already ended up being incompatible with my case (which was supposed to support an SSD board). So it seems like if you want to ensure proper fitment for a case, you may want to stick with the official versions of these products.

I finally got around to running a bunch of ethernet with POE and set this up as part of a sensor array. So far I have been super happy with this hat. As others have mentioned, the raspberry pi UI seems to get confused with low power warnings. I have not experienced any under voltage issues and the setup process was pretty straightforward

This item was supposed to be compatible with RBPi5 and allow 5A usage. When I connect it, the RBPi does boot, but this notification appear: "This power supply is not capable of supplying 5A. Power to peripherals will be restricted". That is not what was advertised and not what I expected. I expected to get full use of the USB3 ports, i.e. the ability to connect a 900mA device to the USB3 port.

I'm of the opinion that PoE power should have been included in the RPi5 natively, but I'm glad this HAT exists and makes it so I only have to plug in a single cable for my Pi.I'm glad there is an included fan, since this goes on top of the Pi and might interfere with other cooling solutions you might have been using.

It is nice to finally have a single cord solution for my Pi5, it can now truly just be a network appliance. No more network and power cables. I have not had any issues so far with the PoE hat providing power to my Pi5 when connected to my Unifi 48port PoE switch.

I recently added the Raspberry Pi 5 PoE Hat to my setup, and it’s been nice to mount it away from my network closet (I use my pi as a Home Assistant server, and wanted it closer to some of the blue tooth devices. Being able to power my Pi through a single Ethernet cable has made my setup cleaner and more efficient, since I only had to run the one cable. The built-in fan does a great job of keeping the Pi cool, even during heavier loads.The only downsides are that it adds a bit of height to the Pi, which might be tricky if you’re working with limited space and say good bye to most off the shelf cases. The fan was a bit noisy especially when the Pi is working hard. Overall, if you’re looking for a reliable way to power your Raspberry Pi 5 via ethernet this PoE Hat is definitely worth considering. Hope this review helps with your next project!

Yeah just like the title says, this is a good POE hat for the raspberry Pi 5.Simple packaging, easy installation and works exactly as it should.

Alright, let’s talk about this PoE HAT for the Raspberry Pi 5. First off, the metal heatsink is a nice touch. It's clear they've put some thought into keeping things cool. The included fan is a bonus too, especially if you're running your Pi under heavy load. The whole thing feels pretty solid and well-made.I was a bit worried about the setup, but it was actually pretty straightforward. The HAT fits snugly onto the Pi, and the connections for power and Ethernet are clear. No major headaches there.So far, so good. The PoE function works like a charm. No more tangled power cables! The 12V and 5V power outputs are handy for powering other peripherals. I haven't pushed it to its limits yet, but the fan seems to keep things running smoothly.Pros:Easy to installSolid build qualityMetal heatsink and fan for coolingPoE functionality is reliableAdditional power outputs are usefulCons:Haven't found any major issues yet, but I'll update if I do!Overall, this PoE HAT is a solid choice if you're looking to simplify your Raspberry Pi setup and keep things cool.

The Power Over Ethernet (PoE) HAT with Metal Heatsink for Raspberry Pi 5 is an excellent accessory for enhancing the performance and versatility of your Raspberry Pi setup. This HAT not only provides reliable power delivery but also includes features that ensure optimal operation and cooling.The onboard cooling fan further enhances this cooling capability, ensuring that your Raspberry Pi remains at an optimal temperature even under heavy load. This is particularly beneficial for applications requiring continuous operation or high processing power.The PoE HAT supports 802.3af/at network standards, providing seamless integration into existing PoE-enabled networks. This allows you to power your Raspberry Pi through an Ethernet cable, reducing the need for additional power adapters and simplifying your setup.With both 12V and 5V power outputs, this HAT offers flexibility for connecting various peripherals and accessories. This versatility is especially useful for projects requiring multiple power sources or additional devices.Installation is straightforward, and the HAT is designed to fit perfectly with the Raspberry Pi 5, making it an easy and practical upgrade for your projects. Its combination of efficient power management and cooling features makes it an invaluable addition for anyone using the Raspberry Pi 5 in demanding environments.

I love this PoE HAT module from Waveshare!Waveshare stuff is always very good quality - great board construction with excellent quality components. This board is no different. All the tolerances for everything are perfect - it installed effortlessly after watching the video included in the product listing. Note that a LOT of PoE gear uses the older standard of 802.3af, which can only supply up to 15.4W - you'll get complaints from your RP if you use that! In fact, this PoE HAT might not even work with so little power - and I'm not going to test it. My own testing used a UPoE switch (60W) which worked perfectly.I love being able to reduce the number of cables going to my RP gear and this is the best option - power and data over a single PoE-enabled Ethernet cable!Recommended!

*** The good 👍 ***👉 I ran into a slight issue due to the fact I am using a set of heatsinks that are held in place with a powerful glue. It prevented me from pushing it down so it would sit flush, but the current does pass.✅ It is interesting to note that the pin fully acts as a passthrough. In my case, the 2in LCD screen works perfectly.Verdict: 5⭐I hope my honest, real-life review will be helpful to you. If it was, don't hesitate to like it!

This hat is very useful for my application that involved pi as server, because this required 1 wire to provide internet and power to raspberry pi which is great. It includes screws and heatsinks and fan so it can be install right away. I will recommend it.