XQDC4 4 AWG High Current Power and Ground Quick Disconnect with Surface Mounts

This is not new

Very well constructed and solid product. The instructions are lacking detail and others mention difficulty disconnecting. Note that the connector must be removed from the mounting bracket before trying to separate the connection. There is also a second cover over the screws on the battery side that must be separated to expose the screws. Once you figure out how to take it apart, it's a very good design.

Ordered this twice 1st looked open and missing mounting base. So i ordered another @nd one same thing. Not worth buying will be returning this one also. Well made though I will give it that..

Used for Sub Woofer speaker/amp. Really nice for quick removal of the sub/amp. Unit makes a really good connection and meters minimal resistance. It's rated for more amps that i will ever need. If you're using quality amp stranded wire, the 4ga wire terminals work best when using ferrules - if not the wire tends to squish out when tightening. I bought two of these for 2 different set-ups and I can change them out without any rewire in the vehicle. Would recommend.

This plug is pretty much un-useable, way too tight, required significant effort to separate, and that is uninstalled and with no cables connected. Attempting to separate with leads connected would surely detach cables from the forceful handling required to attempt separation.

This is really nice to have. I used mine as a disconnect and basically a reducer. I ran a larger guage wire than I needed to get the power closer to my amp for less voltage drop, then from this block to the amp, I ran the maximum guage my amp would accept. Works great.