VEVOR 15L Sonic Cleaner, 40kHz Professional Cleaning Machine with Digital Timer & Heater, 110V - Ideal for Wrenches, Screwdrivers, and Industrial Parts Cleaning, FCC/CE/RoHS Certified

Works great with a few tweeks, Setup and testing and prep. takes an hour or two.The spacer disks will have to be cleaned up and finish sanded to remove debris from mfg.cutout prosses. I also made label protectors from silicone 1/16 sheeting.First mod was to cut the lid with a dremmil and cutoff wheel so it would fit with the motor installed.2nd mod was to replace the 24v motor wall wart with a 12v 1amp walwart, as the 24v rotated the motor way too fast.3rd added a bluetooth wired bbq type temperature probe.Cleaning solution i finally settled on was Distilled water, 2 caps of the iSonic fluid "blue" ,2oz of X100, ipa 100% home brew premix concentrate.Premix = 1gallon distilled water, 8 to 10 caps of X100 and 10 to 12 caps of 100% ipa. Shake the hell out of it , this will desolve the x100, let it settle to defoam.I run a 12 minute cycle with machine set to 28c. And a preheat to 86f. realtime temperature on the inkbird probe.I run 3 albums at a time, to center 3 albums in the wash basin load 3 spacers to start then a album and 2 spacers between each album with a silicone protector on each side.The last spacer is a single. This centers the 3 in the wash bin. Pre sweep each record with a lp dust brush. Inspect each lp for pressing defects.Post clean , lift the motor and drip dry for 10 minutes with a fan blowing on them then 10 minutes in the included drying rack.This method yealds spotless results and cleans all but the worst finger prints. With no water spots and fast air drying. Heavy soiled and fingerprinted albums need to be pre cleaned. No way around itDont freak out when your fluid gets cloudy before you clean anything. I clean 30 or 40 albums or more on a fluid change.Noise? Yes it is noisy. You wont want it in your listening room. If its in an adjacent room with the door closed you wont hear itIts significantly quieter while its spinning albums in the fluid. Louder while empty or preheating with the agitation motors running as this helps speed up preheating.Agitation causes heat.Overall its a very good value considering the motor with slide is all cnc aluminum and very nice. The included drying rack is nice and solid. It comes disasembled and requires assembly and adjusting. It has 4 arms that can rotate and slide. Wider is better. Its kind of fiddely so multiple adjustments may be nessisary to get it right.Its really awesome once its propoerly adjusted. If your record is leaning its not adjusted rite.

This thing seems to work very well. I would order the biggest one possible if I could do it over but it fits most small engine carbs. I use simple green n water 50:50 and it really cleans gunk off. I bottle and reuse the solution until it’s no longer green and turned black. I’m also nervous what’ll happen to the finish if stored with solution inside overtime.Only cons IMO areIf your not careful with heat/time stuff is in there it can dezink cheaper metals. I generally don’t turn heat on as much now. The liquid heats from the frequency vibration alone and turning heat all the way up+ running multiple cleanings in a row gets hotter than the highest heat setting. Not a reason not to buy it imo just be mindful and it’s fine.I also wish the timer was more than 30minIt only reads Celsius which is tough in the USAIt is quite loud so I generally turn it on and leave for awhile.Overall it’s hard to beat how well this thing cleans cruddy old carbs and has been worth every penny. Probably cleaned 10 carbs now and one of which would have been thrown out doing the carb cleaner/compressed air method.

Worked fine for one day but the motor that spins the records died after only a six hours of use. The power light comes on but the motor no longer spins. Without the record spinning motor the cleaner is useless for cleaning records.I will happily change this review to a positive one if the vendor can provide a replacement part. However, I can't find any way to contact them for support or a replacement part.When it was working it did a great job cleaning records. So it'd be really nice to get it working again.--update--Contacted VEVOR support. They were responsive, but took two weeks to send a replacement motor. When the shipment arrived, three weeks after my initial contact with them, it contained a totally unrelated part. Very disappointing experience.Do yourself a favor and avoid this e-waste product with inept support.

geat product for the price worked well

Why did you pick this product vs others?:Works well, powerful, good time, intensity, and temperature adjustments. Good quality stainless steel. I would buy this again.

The media could not be loaded. Why did you pick this product vs others?:Better price than most other companies. Most other companies wanted to charge $1,000+ for one this size. Storage capacity:5.5 gallons Size:5.5 gallons (hope they start selling bigger ones)Use:Used it to clean my engine intake manifold and valve covers Durability:Currently using it outside sitting in the sun and rain and it's still holding just fine Appearance:Nice stainless steel body and tub. Has lots of air vents on the side and bottom and a cooling fan underneath to keep components cool inside. Noise level:Not as loud as it seems in the video it took but it does sound like a old CRT TV running.