Flynsu 68085908AH Diesel Exhaust Fluid DEF Pump Replacement for 2013-2018 Dodge Ram 2500 3500 4500 5500 6.7L Urea Pump Level Unit Module Kit 68192659AH

Works great so far. Easy replacement and saved hundreds of dollars over oem.

I priced the pump at Ram and they wanted $2000 for a remanufactured pump, after installing the Amazon pump it took about 10 miles before my scan tool could erase the codes. The reason I replaced the unit is because the sonar board failed and the DEF gauge showed empty when the tank was full. Make sure to buy the tool to replace the pump because it’s tight, like 3’, 1/2 inch drive breaker bar tight!

The item did not work or pump the def and it leaked

Update: increased review. They did the right thing by sending me a replacement after i sent them photos of the problem. Once i install the replacement def pump, will see how long it will last thing time around and update the review.Pressure not enough, causes check engine, it worked only twice, 3rd time failure. Something with this model is not a reliable motor in the def pump. It only worked for 2 times and the 3rd, 4th time, the def pump is causing problems due to pressure reduced. I checked the pressure during initial install, but it has significantly reduced. No line blocks and the def injector is still good. Double checked with a working def pump, and all other components are working fine except for this def pump I brought from amazon.

My husband installed this in his 2014 dodge ram 2500 cummins and it immediately came out of the DEF limp mode. Wonderful to have his truck up and running and not have to pay and arm and a leg to get it going! Thanks so much

I bought this DEf pump for my 2015 Ram dually .It is working great so far .It takes about an hour if you haven’t done it before and are careful to keep everything clean so no leaks . Buy the tool to remove the lock ring.So far it seems to be a great value .It looks almost identical to my factory pump

Worked and fit for application. 2015 w4500

I had a defective pump that was throwing a low pressure code (P20E8). This pump solved the low pressure fault but threw multiple alternate codes. It issued seven different codes including both heater control circuit low and heater control circuit high which is impossible - can't be both. Seemed to pump fine but it has to communicate properly with the onboard computer as it apparently wasn't sending the proper voltages. Returned for refund.