74oz Platinum Silicone Mold Making Kit with Molds Housing & Mixing Cups, 1:1 Ratio, 20A Medium Hardness, Non-Toxic Liquid Silicone Rubber for Resin, Jewelry, Craft Molds

This was my first time making my own mold for epoxy resin and it worked perfectly. The instructions are clear and easy to follow. The forms that come with it are high quality. The amount of detail captured is amazing. Once it is completely cured, it is not sticky at all. It is definitely worth every peny.

This package has a few nice things that'll definitely get used if you have projects lined up for time on your bench. You're already going thru cups, nice graduated oz and ml mixing cups, fat stirs are a plus if you've ever used the thin Popsicle types. Toss out the gloves. You'll hate them because they fall off. They're clear plastic, better off being made into pastry bags. Then the universal mold bits. There's double-sided tape I suppose you'll put on the bottom lip, but I didn't use it. I wish I had 2 or 3 sets of these, to make a big mold. I hot glued clear plastic to the corners for a long mold. Hot glued the pieces and sides down. I used it with silicone and had just a slight slight leak between pieces. Resin would probably seep out. You could put tape on the inside seams. Overall, it's nifty to be able to just have a small general shape you can mold and cast with. Hot glue Does stick to it, use hot water to help clean. Great package, excellent value!

Started off with a 3d print to make a mold of. I left a little in each cup after mixing so that I could check to make sure all batches cured. All of them did great using the suggested 1:1 by weight. I did notice on the smaller mold I made, the hot glue I used prevented curing at the surface level for all points it was in contact with, such as the corners and center where a tiny bit squeezed through my casting piece. On the larger mold, I used some generic air dry clay to prevent silicone from getting into a harder to reach detail I would cast on the second part. That clay prevented curing at the surface level as well. I may attempt cleaning up with alcohol or cornstarch as suggested online but it might just have to be a mistake I take the loss on as a first timer. Overall I'm pretty happy with this kit. I didn't use the plastic parts, I instead used foam board to fit my specific dimensions. It's a great kit to start out and includes everything you need.

Works well, but the jugs are messy. The actual silicone works fine, doesn't take too long to set up either. You need to pay attention to the pigment you want to use if any. I used a powdered mica and it looks great. But the jugs are not meant for pouring small quantities. I would pour it into some of those old style mustard/ketchup squirt bottles. Because no matter what, you're going to make a mess when you pour it, might as well transfer it to a better bottle first.

The silicone was awesome, it came together beautifully, I added some mica for color and it was ready to demold within 2 hours of pouring. The mold is lacking as it does not come out straight when assembled, there are some edges with plastic bits that keep the pieces from coming together (and preventing spillage), and many of the binder clips were extremely hard to open and use. Overall I recommend this brand for their silicone but would recommend finding the mold elsewhere.

great!

I've been using plat silicone for 20+ years and I love the molding forms, but the silicone itself doesn't cure properly. It seems to be allergic to professional mold release agents and any kind of cheap agent like dish soap or oil which causes it to become unreliable at best. Part A separates in its own container, so its advised you mix part A with a blender or paint mixer for some time before using. Use all at once, as oxidation seems to make this much worse. Even doing this will not guarantee any quality results. I may have gotten a bad batch but I'll stick with professional stuff from now on. I had read previous reviews so I followed instructions exactly and let the mold cure for 9 days before touching it. It ruined most of the pieces being molded because some part of the silicone permanentally bonded to the items being molded, despite the use of mold release on all of them. Never had this problem with Smooth On products.

Says translucent , but these are very cloudy hard to see through , and the downside is the 6 to 8 hours to cure i do like how it comes with everything you need.But the 74 oz is also deceiving.Because it is not seventy four ounce containers , it is too smaller containers which equal seventy two ounces

La calidad del silicón es excelente y siempre llega a tiempo. Sin embargo, sería ideal contar con una presentación más grande, ya que pido varios litros a la semana y termino acumulando vasos y accesorios que no utilizo. Para compras ocasionales, lo recomiendo totalmente, pero para grandes cantidades, los accesorios innecesarios resultan un desperdicio. La recomiendo ampliamente

I love the products ! really strong and thick. Easy to use. However i followed the instruction and it didnt really work well so here is the adjustment. (note that you should make a test with the mix and different surface and different time mix and time cure before you poor the whole thing since if i did that i would have wasted 180$ of material) 1- Mix part A and B equal in weight. 2- Mix for like 5 min (cause 3 is not gonna mix enough in big quantity) 3- Poor in a mold (cause it's not thick enough to stand on its on. Its like water) 4- Let it cure for 30 min to 1 hour with the object inside the mold. 5- Remove the object and let it dry for 3-6 hours (since the part that touches the item is gonna stay sticky if you don't let it dry.) 6- Now you can use the mold. Hope that helps. The silicon really goes into tiny details and you can poor many layers if you didnt mix enough to cover the item. I bought silicon mixing cups and its amazing to clean. I tried to mold fimo and other similar paste but it doesnt cure. So dont use that. It cures very well on plastic (like plastic cups). It's meh on leather. Oh and I like that the silicon is see thought so i have more control over my final result. Once the silicon is cured it's non sticky and super durable. If you fold it and there is a little crack then it's gonna tear apart. But as long as its not damaged you can use it multiple time. I needed 3 times the dose here so i found it a little expensive for my project. I dont compare it to other silicon i just think it's expensive for my budget. See ya

Es un buen producto, en relación precio y calidad es excelente por que ya lo he trabajado y por ello lo pedí nuevamente. ¡LAMENTABLEMENTE ESTA VEZ NO RECIBÍ EL PRODUCTO, APARECE COMO RECIBIDO PERA NUNCA LLEGO A MIS MANOS, ES UNA LASTIMA! y por esa razón me lo pensare nuevamente antes de volver a comprar, no quiero perder dinero.

I thought it was great and the price was too. I got a lot of tools with it as well. I usually get a pair of gloves and maybe if I'm lucky I'll get the containers for mixing. This product came with gloves, stir sticks, the syringe type things, and the pieces that you put together that holds the silicone and mold you want to do. It mixes the exact same as the expensive stuff, I got an awesome deal. There's one thing I don't like about the green, it's that its very firm when done and I have such a hard time getting the little stuff out but they probably make different types like bbdino. I'll just try the whiteish clear next time. The stuff works amazing. I recommend for sure.

This silicone is very easy to use and mix by weight. My molds turned out firm by very pliable. I liked it so much I just placed a second order. The kit of things that came with it was very thorough to begin making molds