Motorcycle Fender Eliminator Compatible with Husqvarna VitPilen/SvartPilen 401 2020-2023, SvartPilen 125/200/250 2020 2021 2022 2023 Tail Tidy

Worked well on my 23’ Husqvarna Svartpilen 401. No fitment issues and looks good!

The wires were too small a gauge to work properly. Also the light did not work. I drilled a few holes and was able to use the factory light. However the steel sheet holds up well and fits as described with a little work.

Couple of downsides... the tag light it comes with has wires that are thin and I couldn't get them to hook up and stay. They show in the installation video that they just connect and electrical tape them together. I didn't want to do that. So I bored out the holes a little bit to fit the stock tail light that comes on the factory swing arm. In doing so, I was also able to use the same connection as stock. All in all its good and works well with a little fabrication. I'm happy with it and can't really complain for the 40 dollars it cost.

Mostly compatible with this bike. The plate sits so close to the wheel it will contact if you ever need the Svartpilen's full suspension range. I did. Temporary fix? Bend the holder upwards. Pics for reference.

Following others advice I used the stock license plate light, which required complete wire rerouting and some drilling in the tail tidy to make room for the factory connection that sticks out a millimeter or two.If you're using (or planning on using) the Husqvarna tail bag with mounts you'll have to get a bit creative. Buy longer hardware and drill holes to move the stock turn signals further back to clear the support brackets.Find an undertail that works, for $40. This is literally the only one.

I’m not too much a fan of where the bolts/electrical is now . It’s a bit exposed to the elements without some of the factory plastic covers for the turn signals . Other than that it worked, I ended up using the oem license plate light . I just drilled the hole slightly larger . It’s very soft metal so don’t be afraid to drill through it . I did with just a Philips head lol . Overall it helps shed a good 4-5 lbs from the old huge bracket .

Tail tidy arrived in great shape with all install hardware, all good quality, and great instructions.Waited for a rainy day to wrench it on.

Good quality. You can modify the bracket to accept the factory license plate lamp. Major issue is that the tire hits the plate upon suspension compression. I would not recommend based on that.