Corsair Dominator Platinum Airflow RGB LED Memory Fan Cooling CMDAF2

I am using this on Patriot RAM, DDR4-3400. Dropped idle temps by 10C and has stopped freezing issues I had. It was not required for a 2 DIMM setup but when I moved to 4DIMM for 32GB of RAM for virtualization and gaming they memory would overheat and cause the system to freeze sometimes. This product has fixed the issue. A bit pricey but also looks very cool. Very easy to install. I am running the XMP 2 profiles on my RAM but with the extra cooling, I might try to push my OC further.No need to adjust fan speeds, have them at the maximum at all times as this thing is dead silent.Also, had no problems fitting underneath my CPU water cooling pipes. Fitment is excellent. in a half tower ATX CaseMine came with all parts required (screws and all) unlike some of the other reviewers reporting here. Corsair seems to have fixed their packaging issue.Highly recommended for 4DIMM setups where heat spreaders are not enough.NOTE: I do not have the CUE USB hooked up to modify the colors for my Corsair CPU watercooler or the RAM cooler. They are pretty cool right out of the box.System:Intel Core i7 6700kASUS Maximus VIII Hero running latest BIOS (as of review date)2 Patriot 16GB Kit (2 X 8GB) 3400 MHz (PC4-27200) running in dual channel (32GB total) running the XMP 2.0 profile for a modest 8% overclock.Samsung 850 Pro M2 SATA SSDGeforce GTX 1080 Founders EditionCorsair H100i v2 Watercooler for CPU

It works; the noise level is a lot quieter than I expected. I really can't even tell if there is any noise considering the other fans in the PC makes more noise. I keep it ramp up about 90 percent fan speeds. So far no complaints.I'm running 4 sticks of GSKILL ram and they get toasty at about 40C idle and 50-55C while gaming; the heat cause a bit of instability with just pushing 1.36 volts in all 4 slots. Of course the heat from the GPU didn't help either so I needed a remedy. Now my ram is sitting at 35-37C idle and when gaming it only gets to 40-42C max! Dropping it 10C+ is incredible.At 60+ dollars this is a bit expensive; but its a specialty item plus rgb so the cost is somewhat justify. The build quality is really good; although you'd want to bend the legs inward more so it grabs more firmly onto the ram retention to hold it in place. It's all aluminum thus a tad heavier than I would like it to be. The silver grill part could've been made of plastic to reduce weight instead of solid aluminum; but its high quality.Getting this to work with the iCue software was tricky but after some tinkering, setting it to the 8rgb fan mode in iCue works and you could even set it to the rgb strip mode to work.

I am running a high power system to mainly do photoshop and run Folding@home and BOINC computational distributed computing. My Corsair Dominator memory (two 16gb sticks) during high workloads was running a little hot at 42-44 degrees C which on occasion would cause memory faults. The air cooling of this device reduced the running temperature to 36- 37 degrees C and the differences between the two sticks to 0.5 degrees C, which is plainly amazing. The only negative side is that I cannot get it to play well with Corsair iCUE software as it was designed to work with its predecessor LINK. I can turn on one light or the other, or both and I cannot control the color. Since I care little about the lighting I will keep it but beware that it's an old design (2015 or so) and expensive for what it does.

I am running 4 sticks of heavily OC'd Corsair Vengeance RGB RAM (BDIE). Running 3600mhz 16-16-16-34, TREFI 155ns and all secondary / tertiary timings tuned to extreme / tight settings and utilizing 1.44v. I had been running into thermal stability issues where the RAM would get up over 45c and climb towards the 50's while gaming. As a result of this I would experience memory stability related crashing.After installing this and running Karhu RAM test over 10 hours I am finally stable peaking in the mid 30's on RAM temps. I think it looks pretty good too.Saw some reviewers state it has a loose fit and large gap between the fan and the RAM sticks and didn't provide much cooling. These reviewers clearly mounted this cooler wrong as when you mount it correctly over the clips of your memory brackets it clicks in snug and sits very tight on top of the RAM sticks. It gives much needed 10c delta over non-active cooling.If you're running heavily OC'd and highly volted BDIE RAM but do not want want to waterblock your RAM this product is a good purchase.

I like the Dominator... Installation was somewhat not so easy because of the small tight space I had to install it in. So I had to remove the video card to get the Dominator positioned correctly. Not really a big deal just took a little more time to install. So far liking it a lot. Looks really nice. As far as keeping my Corsair Air Vengeance Pro Series (32GB) cooler, maybe. System already runs pretty cool, but I can say the extra fans it provides cannot hurt. What sets this a part from the standard Corsair Dominator sold for roughly $20. cheaper here on Amazonis is it comes with the "Lighting Node Pro" connector. This allows you to change fan colors etc via Corsair Link software. The software is free you just have to download it from the Corsair website. Overall I like it and would order it again just for the cool factor alone. Surprised there aren't more reviews on it meaning more people purchased it. Hope this helps...

Nice addition to me build. Not super cooling power but looks great. Colors controllable with Corsair RGB controller which was why I bought it. Fits over top of my tall heat sinked ram. Quiet operation.

I'm using 32gb of g.skill at 4133mhz cl 16 aida64 latency 37.6 at 1.5v and I was able to drop from 56 to 44 fans speed at maximum and you can't even hear the noise, very happy with the purchase i didn't expect that much drop of temp.

Ein sehr gutes Produkt und kompatibel mit der Corsair Lüftersteuerung

De calidad

Esta guay y eso, pero las luces Led no es que se puedan controlar... en fin estéticamente esta chulo, aunque actualmente no sirve de mucho 😅