Sparco0049302 Guide Eco Series Slider

Hi brought these to attached Cobra bucket seats to my Subaru Impreza 2010 ,I did not have expensive subframes which are stupid money to buy so I used the original brackets on the original seat , Now if you are not mechanically minded or good at doing diy or have the proper tools and not your micky mouse ones then these are not for you . Unless your fitting to a flat floor which is a piece of cakeTo remove brackets from factory seats you need to drill out the spot welds and the pressed in bolts and you wont be doing that with your 5.99 drill bit set from bnq , you need the proper drill bits for spot welds and for high strength metal be prepared to pay up to 20-40 poundsOnce the brackets are off just marry them up to the new rails and place in car to see if all lines up if yes take back out then tighten bolts up and use a MiG welder to weld them to the rails for added strength .The only issue I have is the adjuster bar does not fit it is to small for the base of the seat underneathit needs to be modified and widened then welded into place , but you can manage to adjust the seat for one time fitment using a bar and a spare hand if you don't need to keep moving it once its inThey are listed as universal so its expected to have to do modificationsBut overall im happy with the quality of them

These slider rails are really good they are absolutely solid they are very high quality as expected from sparco and installation was simple it fitted straight to my sparco bucket seat and straight onto my GT omega art cockpit I'm very happy with these slider rails they work exactly as intended they were also really good value only €50 which is very cheap I would definitely recommend this product

Used this for a sim racing set up. Been using it a few years now and it has held up great.

Easy to install and the bar is slightly flexible with effort so you can adjust for width variances

There okay for what they cost , listed as new but you can tell they have been scratched loads and then someone at quality control have noticed and gave them a clean up with a permanent marker as you can see the colour differences quite clearly , dont really matter as there under a car seat , wouldn't say there sparco to be honest as had some rubbish DIY sticker printer upside down slapped to the side of them but at then end of the day they work 👍 6/10

This has transformed my normal gaming chair into the perfect gaming centre for when I play driving games. I made myself a perfect fit frame and these really work brilliantly!!! Would highly recommend for anyone wanting to build their own gaming chair unit.