Uniflasy 12" Fire Pit Ring Burner Kit, Stainless Steel Propane Gas Firepit Ring Kit with Spark Ignition, Control Knob and Propane Hose Installation Kit for Indoor&Outdoor Fireplaces DIY Burner Kit

Easy to install, looks to be quality. Make sure you look at the picture of the brass fitting to have the arrow pointing in the right direction.

I have a large fire pit that had a deep metal pan that completely rusted out. We also had a rodent chew a hole in the regulator hose. I was stumped for a solution until I saw this. It was much shallow than the original pan, but once I removed the old one and cut out the mounts it was able to sit down into the table top unit with millimeters despair along the edges. Installation wasn’t difficult, although the instructions are terrible. A couple of things to note. 1) You will probably have to mount the control panel creatively. There are holes in the sheet metal, but they didn’t match the holes for the controls that I removed. It took some work but it wasn’t too difficult to find a way to mount it. 2) there are two regulators that you need to be aware of. One is right next to the attachment point to the tank. It’s a big red knob. The second one is on the control panel next to the igniter. Once you get everything installed you will want to open up the red knob enough that you have full control over the flame using the control knob. You’ll see what I mean when you get it installed. If you’re not getting any flame you probably have the primary regulator closed too far. 3) the ground wire for the igniter gets attached to the screw that you use to hold the igniter in place. That’s not clear in the instructions. The kit comes with everything you need, including some screws and yellow gas line tape that you will want to use to connect each of the metal parts. In my case the attachments at the valves were very tight but you will want to check them. However, the connections to the Berner are all loosely fitted so you’ll have to take them apart, tape them up, and put them back together snuggly. Overall it wasn’t very difficult, and it works quite well. I recommend the kit for anybody who’s repairing a rotted out propane fire pit. Oh, we used black glass in ours. A 20 pound bag will fill the 18 inch drop in up to the burner, but it will take another 10 pounds if you want the burner to not show. In our pictures I had just put in the first 20 pound bag.

Very heavy duty perfect as described. Im looking forward to seeing it installed and lit up!

I really like this kit. The components are stainless steel and have a solid feel. There is an additional control valve on the regulator which seems to complicate things and the flame slowly diminishes. The main control knob is quite stiff and makes it hard to fine tune the flames. Updated after using this for several months the igniter has stopped working and the regulator on the hose and the control knob are not working properly.

First the good. The fire ring, couplers, hoses and valves all seem like they are really good quality, came with good instructions and were easy to assemble. I feel very confident about that part of the purchase. Now the not so good. It really only has two settings. High (as shown in the photo) and very, very low. There do not see to be any variants in between. The igniter bundle is made of cheap plastic and the instructions leave a great deal to be desired. I'm getting a spark and it lights the ring but till not sure if I've done it correctly and that worries me with gas. I may opt to just use a lighter instead. I needed to replace the system on my 10 year old fire table and this one works, but overall, its a bit of a downgrade.

I'm very happy with this! I'm not sure why people are having trouble with the regulator, it works great! It is capable of a very high flame! Counterclockwise the smaller the flame! You just have to understand regulators and know how to adjust! As long as your hole is of size the pan fits right in! Very easy to assemble! If you're igniter doesn't work try spinning the battery around! Very easy to assemble everything was included! The trickiest part, depending on your model is mounting the control panel! If you're lazy! Just stuff it underneath you don't have to mount it at all! For the 18-in what I have I recommend 20 lb of gravel I ordered 10 and decided it wasn't enough I ordered another bag it'll be here Monday!

Very nice product. I was looking for a way to retrofit my 20yo fire pit. This was everything I needed minus a few screws to bring life back to my fire pit. The gas adjustment allows for a great flame height range. Overall extremely happy

Works great.