Birchwood Casey Fast-Drying Fast-Acting Presto Gun Blue Touch-Up Pen for Restoring Scratched and Worn Areas, 1 Count (Pack of 1)

Works just about perfectly for what it was designed to do. Makes small touch ups easy to do.

I installed new sights myself on my LC9 that didn't fill the dovetail joint all the way. Had about .010 of the base of the joint on each side of the front sight still exposed and the coating was very light under the original sight. Probably due to the original sight being installed then uninstalled which is normal. Also on the front sight, before installing the new sight, I had to clean up the front and rear "sharp" edges of the joint ever so slightly before installing the new sight. About .005 on both front and rear. Against that black of the slide, that silver stood out like a sore thumb! There was no damage, just the coating was worn. I looked on YouTube for a solution and saw this pen. So I tried it and it worked perfect!!! I cleaned only the area missing the coating with a cue tip lightly moistened with some acetone (wife's finger nail polish remover lol, same thing) very well. Let dry for a minute or so then used the pen. I went over the silver lines about 5 times letting it dry for a minute or so before each application. I also used a "NEW" soft bristle brush I bought from Harbor Freight (about a buck) every couple coats to kind of blend it a little. It was about 99% perfect. I don't think anyone else would of really noticed but me, but when I took a cleaning patch with a dab of gun oil and wiped it down even I couldn't see it anymore. I took another patch (no oil this time) and wiped the area as to get as much oil off as possible and it was absolutely perfect!!! Nothing came off and I couldn't even tell where I did the touch up. I really tried my best with a couple more clean patches to wipe it off and it still looked great. I see that some reviewers didn't have the same experience as I did and I was on the fence about buying this, but I'm glad I did. The job came out so great except for those darn lines that really bugged the heck out of me. Anyhow, problem solved!

Used it for some newb first timer scratches on my blued 1911. Did a great job covering them up. Easy to use, works and quickly. I'm far from a gunsmith, so this is a great product.

This bluing pen did a nice job.

I was able to fix the minor scratches on my firearm with this maker.

didnt work properly directions said push on pen to dispence tip stuck in and blue didnt dispence and tip stuck in pen,unable to use.

I was apprehensive about how well this would work, but I got a decent scratch on a parkerized barrel and needed to try something. This product filled it in almost perfectly, you have to look really hard in the right lighting to see where the scratch was. Not sure how well this would work on blueing, but it matches military finishes. I wish I would have taken some before and after pictures to show how well it worked.

What I said in the title...