Greatfishing Fly Tying UV Clear Glue And Power UV Light Combo, it is value combo for fly tying. Except the most popular thin glue and thick glue, we add a special soft glue in them. All them in 20ml (2/3OZ). Undoubtedly, UV glue adds new dimension to strength, bonding ability along with flexibility to all fresh and saltwater flies and fly components. No heat needed, simple and ready to use, no need any preparation. Crystal clear and glass smooth. Never turns yellow and also super durable comparing traditional epoxy. Tiers and fisherman alike will find tons of uses from solidifying a dumbbell eye tie-in with thick UV glue, gluing eyes to Pro Softheads permanently, backing to fly line knots, Butt section to fly line knots etc. And also use it for making epoxy shrimp, bait fish head or any flies head. Thin UV glue flows easily with excellent penetration, add the strength form inside to outside. Applying on flies bodies, wings to make them strong from inside, or as coating protect eyes, bodies. Works great over thread, Mylar and wire as well. Soft UV glue is our a new attempts in fly tying, as the name shown it is feels soft after hardening. It increase the strength while maintaining original flexibility, keep the bodies, eyes in soft and wing in flexible, to ensure the flies looks more like alive Apply to fly while indoors or shaded from the sun. Use applicator and/or rotating vise to form into the ideal shape. Expose to sun light or a UV light for drying. In direct sun, or when using UV Lights, hardening should take approximately 15 seconds. Package: 20 ml (2/3OZ) each formula UV light: Surface process: common oxidation Size : 3.86*1.22*1.14 inch (9.8*3.1*2.9 cm) LED: 12 UV 395-400NM Power: 3AAA battery as drive power (battery not included ) Switch: tail switch Product weight:73g Brightness: 11000MCD Last time: 6-8 hours Package: white box
G**K
A good product to have around the house
It is easy to use and a good value for the money. I used similar products earlier successfully. I read many negative comments on this kind of products on Amazon, and I would say this kind of products is not a glue but is like a solder. Glue is used to afix two sides closely, but this product is not for it. It is used to fill a gap like a solder. It has to have a space where the UV can penetrate the whole material to be cured. When I use it like a glue, the UV cannot reach the space and it does not work. If used correctly, it works wonders. I used this product to fill the chips on my hard-to-replace plastic battery holder for my slr camera that became brittle over time, and it worked splendidly and saved it. The product came with sealed tips which one has to cut to the size for the job. I cut to the finest size for my purpose with the meduim flow bottle. The only inconvenience is that once you cut to a size, it can only go to a larger size after it.
R**7
Great for beginners and penny pinchers
It's okay stuff. All three types remain tacky to the touch even 24 hours after curing with the UV light. The light itself is a low budget item that flickers occasionally and needs to be shaken. The thick has a dark tint to it, not exactly clear. It must be the thickening agent in it.There is some off gasing when curing and if you make you build ups too thick it won't cure the bottom layer. So do things build ups.Also, use a tiny drill bit or a needle to punch a whole through the end of the applicator. It doesn't come with one and there are no instructions, but if you are using it on small flies cutting the tops will make the tip too large
A**E
Works well when used along with super glue
Having three viscosity options is great however, adhesion is a little disappointing and the resin remains a little tacky even after under a UV light for hours (I used my own UV chamber but the included light works fine).I would also recommend using this in conjunction with Super Glue 15187 Gel, Clear [New Improved Version] https://www.amazon.com/dp/B07QDB57L5/ref=cm_sw_r_cp_apa_i_qZEGDb6W7FP8V, as the resin can be used to increase the surface area, and the linked super glue to adhere to other surfaces. The box the super glue comes with also perfectly fits the 3 resin bottles
N**G
Works for what is going to be beaten
I'm gonna need to say I'm guessing you get what you pay for with this it seems this is low budget quality as I've used it for about 50 flies and seems each one comes out different quality some stay tacky and off color then some are tacky and shiny clear then some are hard as a rock perfect have found that setting the tacky ones in real sunlight helps so I'm gonna say and try better uv light may be the 5 star fix and for my style of fishing I'm not expecting my flys to last more than a few fish anyways. Will by more
G**D
NO HOLDING POWER
This glue has no holding power. You can apply UV light but it seems to only harden the outer surface and just so deep. And the rest never hardens. I have used the UV glue called FiberFix Total Repair bought at HD. It works great but I could not use all the glue because of stupid product design.So I have been searching for just the UV reactive glue that works as well it did without the UV light as I now have a few. Hoping this glue was it but unfortunately it is not.
G**D
Good for the price
This stuff really does work for the price. Just make sure to follow standard glue practices, like roughing up smooth surfaces for better adhesion. It's not medcail grade locktite, but for the price it's pretty useful.
T**S
Works great
Glue works great. Using the uv light instantly cures glue. I've used this on everything. My rear view mirror fell off so I used this glue to put it back on and it worked great
P**.
Have fun making fly’s
Works great
Trustpilot
1 month ago
1 month ago