Geyser GF51-S Geyser Stainless Steel Commercial-Style Coiled Spring Kitchen Pull-Out Faucet by Geyser

Received and installed the same day. The external packaging of this item is awful! The carton had NOT been taped and was partially open. The internal packaging was premier and saved this item from damage and loss of parts. Take full inventory when you receive this and before you tear out your old unit. Make sure you don't need a 3 hole base plate cover. I did and couldn't find one at any of the big box stores, but they are available here on Amazon for just over 10 dollars.The quality of this faucet is outstanding! It is all 300 series SS and even has braided SS cold/hot marked water lines. My installation went without a hitch. All fittings matched up perfectly and presented not one leak. Adjusted the weight on the dispense tube and the faucet head gores right into its socket every time. If you encounter an alignment problem with the with the faucet head valve, loosen the faucet head put it where you want it and re-tighten hand tight.I'm a very handy guy and understand plumbing, fittings and such. If you don't and have rarely performed any plumbing work, get yourself a pro to install this for you or you may be without a kitchen faucet until you find one. Removing old fixtures can be a bear at times and if you have dated plumbing, you may need conversion fittings.The instructions provided with this faucet aren't for the inexperienced at all! They are purely pictorial with no verbiage and are barely adequate for even a plumber to get the skinny details of component placement. There is no customer service line, warranty information or anything other than a cartoon installation guide provided when you receive this.This is a very nice, well built, smooth operating faucet made of high quality material and construction. It is a fine addition to my kitchen, has great functionality and should last for years to come. If you don't know what your doing, admit so and get a pro. You will not be disappointed with this faucet when the proper installation is complete!Product update!!! I've been using this over 2 weeks now and absolutely LOVE it! Not one drop of a leak, flawless performance and the quality of this 304 SS construction is clearly obvious. A striking addition to my kitchen and the most functional upgrade I've ever done.Product Update #2 - Faucet has been in service for almost 10 months now. I'm as impressed as I was from day one. The finish has held up perfectly, not a single drip and is STILL the best thing I've done for my kitchen yet!Product update #3 - In service for 2 years now and this faucet is flawless. Never one drip after closing the valve to this day! One big reason for this choice was the all 304 SS construction even the faucet head body where most are plastic made to look like brushed SS. Not one speck of rust or corrosion as should be expected from 304 stainless. I have hard water with a lot of minerals, so I occasionally have the clean the faucet head orifices using white vinegar (acetic acid). I'm still thoroughly impressed with the function and durability of this fixture. I highly recommend this addition to any kitchen or bar!Update #4 - In service for 4 years now and still have flawless performance. I still say, this is by far the best addition I've made to my kitchen. This unit is top quality with 304 SS construction, including the head. This unit looks as good as it did the day I installed it. It never leaks a single drop! If your looking for this type of faucet for your kitchen sink, this one beats everything I've looked at hands down for quality, finish and function.

Initially we loved this faucet. It is very attractive and works well at first. However, after less than two years, we need to replace the entire unit.In the first year, the faucet began to drip at the rate of about one drop every thirty seconds. I replaced the faucet cartridge and that solved the problem. The problem reappeared a few months later. We also needed to replace the faucet hose and head.Now, after less than two years in service, the flow restrictor broke inside the faucet hose which blocked the flow of water. I removed the restrictor valve but the faucet does not work properly without it. The pressure is too great and water gets everywhere and continues to flow slowly for about twenty seconds after closing the faucet handle.The original seller apparently does not sell this part, so I need to either devise a custom flow restrictor or get a new faucet.Somewhat astonished that an expensive faucet like this would have so many problems. Will avoid this manufacturer in the future.

The faucet appears to be very high quality and all movements are smooth. It was packaged in foam inside the cardboard to protect the finish. I read the reviews and questions before buying and the sprayer handle itself on mine is all metal. The 90 degree angle of the sprayer holder adds extra height and allows for larger pots and things to be used. Be cautious when buying cheaper versions where the arm will limit what you can do in the sink.The hose is metal which is a plus since the one we were replacing started to fray. Based on every other part of the faucet I'm confident the hose under the metal is high quality.The movement of the arm and the on-off valve are very smooth. I mounted the valve on the front to but you can put it anywhere. I chose that location for our brains to easily think left hot, right cold instead of forward backwards. Installation was awesome. The base has an O-ring seal around the sink so no putty needed. The nut holding the main faucet only needs to be hand tightened, then you tighten two screws on the nut to hold it tight; that was cool. I installed it myself but a second person would have been helpful for ease of positioning. The connections to hot and cold are included and well made, and very easy to connect. The sprayer connection is triple O-ring with a quick disconnect feature.The sprayer is all metal and not cheap plastic. The weight on the hose under the sink holds it in place, not a magnet like some I've seen. The sprayer can be quickly removed and easily slides through the spring. The downside to this is when using very hot water for more than 30 seconds. We have a tank-less water heater set hot and I use hot water when scrubbing a cast iron skillet. I noticed that the sprayer handle can get hot quick so be careful how you hold it. The documentation states in many places that the spray switch is a slider and not a push button. They even added a stand alone paper showing how to use it. The first use of the switch took excessive force to move it. I questioned if it was broken when it wouldn't slide but finally forced it, but after that it easily switches from stream to spray. I'm guessing this is the reason for the extra documents. The spray itself is fantastic. Many sprayers I've used are very small, high pressure streams that reflect water everywhere. This sprayer produces many larger streams at medium-high pressure so the reflected spray off what you're cleaning is minimal, yet powerful enough to clean. The sprayer holes are silicone so I'm guessing it will last a long time and easily clear off any scaling.I have a 4 hole sink. 3 for the faucet and 1 for a sprayer. I mounted the faucet on the right hole of the 3, just off center. This allowed the hose to easily retract under the sink without hitting the drain pipes below but water still easily hits both sinks. The middle hole has a plug, the left hole has an air switch controlling the disposal, and the old sprayer hole on the far right has a matching Geyser soap dispenser. I'll post review links for each of them below soon. I didn't add pictures since the ones they provide pretty much show it.