DNA MOTORING Pair of Headlights Compatible with 98-02 Honda Accord,Chrome/Amber,HL-OH-HA98-CH-AB

These fit our 2001 Honda Accord LX perfectly. It is a tedious task putting them on because the whole front bumper needs to come off for installation, but it is doable for one person. Took me about 2 hours as a newbie following a Youtube video of the process. Be sure to buy plastic tabs to reinstall the bumper and such because many of the originals broke in then process. Or, if you want to go cheap, you can use zipties for many of the holes. They are probably even stronger that the cheap screws that are advised and replacements are $5 each at the stealership. The final product looks sharp and all for a fair price and a little elbow grease.

these headlights are actually pretty great! This is the 2nd exact pair I ordered, the first (Someone backed into one and offered cash vs insurance claim lol) lasted about 2 years before I replaced. I will say, do NOT use any type of alcohol product on these (such as windshield de-icer) as it seems to mess with the clear coat they put on them, however, even with that, GREAT product, mounts up exactly the same as the OE.

I read the reviews of other problems with these lights from splitting between the front clear plastic and back to no ability to adjust them. All I can say is that these lights look very good, installed very easily, had no blemishes or splitting and once installed although the adjustment is weird, they seem to be adjusted fine. They were delivered quickly and came in a very secure box with the packaging foam injected into the box, which cradles the lights beautifully! And at 1/3 the cost of Honda OEM lights they are GREAT!

They look awesome but somebody I won't name accidentally bought the wrong year for his car model... And we can't return now, it's past due.

These fit perfectly

These are VERY VERY AWESOME !!! FANTASTIC PRICE - Purchased "Auxito LIGHT M3" - 9006/HB4 LED LIGHTS pk of 2 for 1999 Honda Accord. O M G ! Tons Better : ) The Head-Light Fixtures are Better, I had a Mechanic install them because the front bumper has to removed. They Did a ===> Fa nominal Job / AWESOME - I Love these Fixtures Like No Other - You swear they Glass by the way they look, even though they're not. Like I said - They ARE AWESOME !!!! *****

They fit and look great with the silver paint on the car

[Final review, for now 1/2/2021] So removed my bumper cover, tied my license plate to the actual bumper (Illegal to have it just on your dash in some places), and went to my alignment spot. (A library. Flat ground, and vertical wall) I loosened the headlight housing, and attempted to push it downwards to give me more room to adjust the beam pattern. But it didn't do much. What I had to do, was mess with the 3 bulb mounting screws. The top-most screw, I set in all the way. The bottom two were left mostly alone. The reason for this, was so that the bulb would sit pointing upwards in the housing, so the reflectors would bounce the light more downward onto the road. The bad thing about this is that there is no longer a seal on the bulb. This may lead to the bulb burning out prematurely if water or another substance enters through the gap. Another bad thing is that the bulb now sits a tiny bit outside of the housing, making the light coming out of it slightly dimmer. (These are brand new bulbs) The beam pattern is better, but still not where it should be. I will keep the original rating of 3 stars. (Beam pattern was about 12 inches above the tape line. Now it's about 2 inches above it. It's supposed to be 2 inches bellow.) [Original review. Written 1/1/2021.] Got these, and installed them last night. When out to adjust these, I was not able to point the driver-side beam far down enough, to reach the 2-inch spot under the height of the headlight, from 25ft away. The lowest I was able to get was 2 inches ABOVE the height. (4 inches higher than what it needs to be) The high-beam is even worse. It points about a foot higher than the passenger-side high-beam, from 25ft away. The passenger-side one was perfectly fine. Something else I noticed was that it was kind of hard to install the bulbs. I had to use a deburring tool to remove some material from the passenger-side low-beam hole, as it would not go in without that modification. The turn signal mounts were tight (Especially for the passenger-side.) And the parking light bulb mounts were a little loose front-to-back, but tight in the twisting axis. I will attempt to reinstall the driver-side housing, and readjust tonight when it gets dark again, in case I didn't install it correctly somehow. If the problem was my fault, I will redo this review. But for now, I'm giving 3 stars for the possibility glaring light into on-coming traffic's eyes, and the seeming mid-range to bad quality control.

LED stopped working after 2 years on driver's side

Me gusto ! Si los volvería a comprar

Ne se fixe pas au bon attache

As described and quick shipping

One of the best product I have ever buy on Amazon. Fit perfectly, clear and really good.