Adjustable Front Seat Spacer Lift Kit for Tacoma 2005-2022, 4Runner 2003-2022, FJ 2006-2014, Lexus GX460 GX470 2003-2022，0.25" to 1.5" Rear of Front Seat Recline Kit

This was very comfortable it function perfectly great value for the money. The boats fit perfectly on my 2007 Toyota FJ. It really set the seat up forward. If you have an FJ this makes it a lot more comfortable.

These seat jackers are nice and work well with 3rd gen tacomas, mine is a 2018 and I used all 3 rings to raise it to the highest height and the bolts tightened down nicely. I will say that it may not be recommended to use all 3 without the front seat jackers as it puts the front screw holes at an angle and doesnt let you tighten them correctly

Way better than seat jackers for front seat legs . Legs feel better . Front jackers suck and hit head on door getting in . These no problems.

If you're buying this for leg relief to use to lift the front portion of your seat don't do it. These lifts change the geometry of the bolts so that the bolts cannot be threaded properly. Also note in the product is designed to lift the rear of the seat not the front. Had I understood this I would not have ordered this product. My 2017 4Runner electric seat has enough rear lift to push me out of the seat not sure why they would make these. If you want pain relief during your travels you'll have to spend the extra $ and search for "Front Seat Jackers" to get what you want. It's what I did. Read the reviews there about how it helps with the leg pain.

Worked well for my car, didnt come loose with some threadlocker applied. The original caps is now floating as a result of the new height. Wish they came with their own to hide the spacers to preserve aesthetics.

The product itself is actually very good quality with a nice anodized finish. 2 different size bolts to use (if needed depending on spacer height). Great alternative to higher priced competitors. Seems like most of the bad reviews are from people who were mislead by the product description. These are for the REAR mounts of the front seats to tilt the seat forward. They won't work on the front mounts.

Great product fit my 2017 Tacoma perfect. made the seat way more comfortable at least it did for me I don't know about you.

Spacers worked great but bolts were the wrong size

Worked great for 2021 Corolla SE, passenger seat was always to low, it is now the same height as the driver seat. The back nuts have some adjustment wiggle room to play with place them first but not too snug for adjustment. You will need a T50 Torq bit to remove the existing screws, they are very tight to loosen. The seat will hit the new nut heads when slid until they are torqued down. My only recommendation would to have torq type bolts as they have a lower profile head.

I'm a 6"3 240lb man and I just installed 3/4 " in spacers in the rear of the driver seat. Unbelievable the difference in comfort .I highly recommend this product .Night and day .Will be doing the passenger seat next.

Good knock offs, fixed thigh and lower back pain issues.

Works great . Makes the seat a lot more comfortable