Westinghouse 7741700 52 inch Oil Rubbed Bronze Finish Replacement Fan Blade Arms, Five Pack,

Item was ok but do not fit the fan blades

I have a 4-blade ceiling fan in the master bedroom of my old house. The fan is over 44 years old and has no identifying brand name on it. Over time 1 of the blades broke at the metal blade arm. I took the 3rd blade off and got by with 2 blades. One of those blades broke at the arm and I replaced it with the 3d blade I had removed. Eventually one of the remaining 2 blades broke at the arm so I had to get serious about trying to find replacement blade arms which is not an easy task for an old fan. After doing a lot of research and not finding any arms the right size for an old fan, I discovered that I could use these Westinghouse 77407 Replacement Fan Blade Arms and drill two new outer holes in the old blades to fit the new arms. I was careful to retain the old arm screws for the motor attachment since their size doesn't seem to be available any more for replacement. I now have a fully functioning 4-blade ceiling fan that operates like new and looks great. Just sorry I didn't consider replacing the blade arms a lot sooner. These are excellent blade arms and not only look attractive but function well.

I broke one of the original parts for my ceiling fan. These fit, and look nice.

I did a quick comparison of the former arms for my ceiling fan against these which I got and mounted today. Some of my old ones had bent. The seller that i got the fan from had left it resting outside on two of the blade arms. It was noticable when the fan was turned on. Anyways, these new ones fit perfectly but there are some nuances that I think deserve attention: 1: The blade mounting holes go all the way through (as shown in product images) but the hardware used to mount said blades is all one length. Two of the three bolts will stick out (I don't care much, and I couldn't find a replacement set that didn't have the bolts go all the way through the arms.) 2: Hard to articulate but shown in my images. The original arm is the one on top in both of the first two pictures. You can see that there are sleeves to center the blades on the arms. This replacement lacked that feature, and the blades will loosen over time and relocate as a result. This will throw the fan off-balance eventually, requiring me to take 'em off and re-tighten them. I'm not aware of a replacement product, especially one so reasonable, that addresses these faults, so it's a tough-cookies situation to my knowledge. I just figured you folks should know incase you find another option that does address this stuff *or* the manufacturer sees fit to address this stuff. All that said, these are a suitable replacement at a reasonable price, and I was fairly careful in centering the blades properly when I did my little install, so I'm happy. If the centering sleeves get added down the line, 5 stars. 08/22/2021

Like many others, I foolishly put a ladder next to my ceiling fan. Then for some reason I turned on the fan, and blades went flying in all directions. I could salvage the blades but not two of the arms. I tried to find exact replacements, but not able. So I went with these because the part that fits in the housing would fit, even though the part that attaches to the blade wouldn't. No problem because I could re-drill holes in the blade. I replaced the two damaged ones first, in hopes it may still be in balance. No luck it didn't, so I replaced all the blades with the new arms. They work great, the fan is in perfect balance and I'm a happy camper.

I just installed the bracket it was a good fit and I’m glad that they included the longer blade mounting screws it all mounted up easily

Had someone help me install this on a 30-40 yr old fan. Ended up buying new mounting screws the old ones looked fine but for my own piece of mind. I wanted the cheaper yellow ones but maybe its not a good idea since my mom broke it. While getting help the dude that was helping me broke the light chain for the fixture. I did not get mad because someone else would of the screws are rusted and the chain is old. Otherwise it is a perfect fit replacement, and no I did not want to waste a day fixing a light fixture but here I am I initially mistakenly ordered the 42 inch ones but got this 52 inch ones the next day after I returned it.

These blade arms were not the same size as the ones they were replacing. These are about a half inch narrower than my old ones. I had to drill new holes in all of my blades. The wood busted through on several of the blades, leaving unsightly marks and notches which I disguised by using a brown colored pencil. Had the wood been a lighter color, it would not have been so easily disguised. Also, I had read in previous reviews that when new holes were drilled for these arms, the existing holes were covered by the arms. This was NOT so in my case. Using the existing middle hole, this LEAVES NEARLY ALL OF THE EXISTING HOLES EXPOSED! The angles of the blade arms are also MUCH different. These arms put my blades much closer to the ceiling, and they are almost flat, NOT AT A GOOD ANGLE FOR DOWNWARD AIR FLOW, much less reverse. I am VERY DISAPPOINTED. Also, the antique brass finish did not match mine. My fans are about 30 years old, and they all have 3 to 4 lights on them. At least the new arms did not interfere with lights.

Très bon achat pour réparer un bras de pâle manquant ou remplacer les pâles d’un ventilateur de plafond! Le meilleur conseil que j’ai pu lire dans les commentaires précédents est de bien mesurer la taille des bras de pâles et la distance entre les trous; c’est un conseil que je recommande à mon tour afin de ne pas être déçu de votre achat et vous éviter d’acheter un nouveau ventilateur de plafond !

The parts were an exact fit and were cheaper than what I could get locally

Excelente producto, viene cad uno envuelto en su bolsa para evitar que se maltraten, trae la tornilleria para unirlo al aspa, lacerdad que le quedaron a la perfección y pudimos reemplazar las vieja spiezas de aprox. 30 años de uso, pero el ventilador aún es muy funcional y no habia necesidad de cambiarlo, este repuesto fue nuestra salvación. Ampliamente recomendado, se siente de excelente calidad.

What more can I say? They were exactly what was needed.

They look good and easy to install