18 Gauge Electrical Wire 2 Conductor, 65.6ft Insulated Stranded Low Voltage LED Cable, 18AWG Red & Black Tinned Copper Hookup Wire, 2pin Flexible Extension Power Cord for Auto, 12/24 Volt Lighting

The wire is well insulated and has enough flex to get around some bends. I used this to run my roof rack lighting and was very happy the quality of the wiring used. If you are running lights on your rig that don't require heavier gauge like low voltage LEDs this is perfect.

I use this wire for projects where I need both conductors in a single jacket for easier concealment. This comes in handy when working with automotive accessories and other circuits that require dual conductors with polarity color coding.

Works perfect for 12 or 24v LED under cabinet lighting

Very flexible, very fine strands. Outer sheath thicker than what I expected, but about normal for outdoor cable. My only complaint is that it is not UL listed. Yes, I read the "low-voltage" description but my guess is this cable would pass UL nonetheless.

Its 12v wire. Easy to strip to your desired length. Not a heavy gauge. I wouldnt use it fir a 300w light bar or audio amp but perfect for running led blinkers on my side by side. I believe they do sell a thicker gauge wire for those other applications

Install outdoor thermometer

Seems well made and solid for my install.

This is ideal for control voltages (12, 16, 24, 36 volts, etc), for example, doorbells, AC thermostats, LED lighting in your home or car, or hook-up wire for the electronics tinkerer or kit builder.It’s electrically rated at 300 volts and 3 amps. That’s a very generous rating for 24 gauge wire, and while the wire appears to be of excellent quality, I would back the max rating down by 20 percent and use that as a guide for specific applications – just for safety sake.The conductors are copper and each wire is individually insulated, with a thick, protective sheath around them. This outer sheath is where the wire gets it’s outstanding environmental ratings. Use it in the attic, storeroom, garage, or other area that is subject to hot or cold temperatures. It should be fine.I wondered if internal resistance would make the wire inappropriate for hooking up speakers and carrying audio signals from a power amplifier. I ran a twenty foot length from my stereo to the left speaker of the system, then switched the music back and forth between the right and left speakers. Even at maximum and minimum volume levels, I couldn’t tell any difference. My amp is rated at 50 watts per channel, so as long as you’re not trying to send hundreds of watts (RMS) to a speaker, this wire should be fine for audio projects, either in the home or your car.If you only need two conductors for your application, use this and you’ve got four backup wires to use in case of a short, an open circuit, or other problem.The wires strip easily, and soldering is a breeze. The actual conductors are stranded, making hook up and connecting very straightforward.Overall, this is very high-quality control/hook up wire, and I highly recommend it.

_

Bonne qualité

Bateau

Wire gauge is a little bit small. measures more like 19 gauge, instead of 18 gauge