MCAMPAS 4 Pack Spark Ignition Flame Sensor, 36" Ceramic Electrode Ignition Plug Wire with M10x1 Threaded Flush Socket fits for Gas Fireplace. Oven Stove. Heater. Kitchen Rang

Used in a fireplace with an impossible-to-find igniter configuration. This one was long enough I could bend it to work for my application. Easily bendable as-new and no problems with installation or function. I am very happy. I would purchase again.

Had to trim but they work decent

Excellent. It' s perfect....

I purchased a higher end grill from a company called 3 Embers. I love everything about this grill, except the ignition system. Each burner has it’s own ignitor and sometimes the igniters fail to light the individual burners. There’s no crossover tube on the burners, so each one has to be lit by spark ignition or that burner must stay off. There’s a total of six burners. I wanted to improve the ignition so I removed all the old ignitors and wires and installed these instead. I had to drill the mounting holes slightly larger, but that was about it. All wires reached the ignition module with no issues. I left the electrode as is, and did not cut it down. All I did was slightly bend them so they line up with a flame hole on each burner. Now when I hit the ignition button all the burners instantly light. No more issues. I actually went back and ordered two more sets to have on a shelf in case these someday need replacement. As of now, my grill lights every time and I’m a happy camper!

These are very nice quality, very adjustable with quite a long thread and 2 adjustable lock nuts, the wire ends are easily bendable but strong enough to stay in place. The connector ends are nicely terminated with plastic covers and fit snugly & securely into the Onlyfire type 14441 Push Button Electronic Ignitor for BBQ (and ones of same or similar similar brands with less connections).Stats:Probe length = 3 1/2"Ceramic length = 1 5/8"Threaded Section (steel) = 3/4" (~centered on ceramic)Pigtail 36" from ceramic to connector end (woven heat resistant jacket)Hole for thread is ~10mm

Doesn’t light grill

The igniters for our 25 year old stove aren’t available anymore. These plugs right on after you increase the size of the burner cover to 13/32 for the ceramic and the burner body to 17/32 for the barrel. If we get another year out it without have to reach for a lighter, we’ll be very happy.The Bosch part number is also used on gaggenau (that’s what we have) and thermador.

immediately one of the leads didn't fire. I exchanged it with another one to confirm that it was the lead not the ignition.. I asked the company to send me a replacement but didn't get anything. Now I think another one of them has failed so I have two burners that fire up not 4.