Game Reaper Ruger 10/22 Medium Mount

I bought and mounted my scope with Zero issues. The mount is sturdy and easy to mount.

* see update below. Very well built mount. The main reason I purchased this mount was watching my father tighten his rings and re-zero the scope on his 10/22 almost every time we went out (yes it had loctite on it and no it was not thrown around in a truck). I have the Ruger 10/22 LVTSB (model 1237) that has a stainless barrel with a black receiver on a walnut stock. So I am not concerned with it matching colors with any part of my rifle... I was looking for a mount I could put on with loctite one time and not have to worry about. I think the Game Reaper is it. I would have given it 5-stars if it fit my scope better. I have a BSA sweet 22 3X9-40 AO and the front rings are up against the start of the bell.  BSA Sweet .22 3 - 9x40 mm Scope Matte Black I am not worried about security of the scope since the mount is so well made, but I would have liked the ability to shift the scope forward/backward a little to match my cheek weld to eye relief perfectly. As for the mount, it came with good hardware and the holes matched up without issue. The "M" as noted by a another reviewer is noticeable when you take it out of the package and pretty much disappears once you have a scope mounted. The medium mount works out very well with the 40mm objective with a gap just under 1/8" with the front AO scope. Even though it is a little pricey, I would recommend this to a friend if you know the measurements of your scope.*I bore-sighted the scope today and it appears that more of the bell of the scope is inside the front ring than I first thought. The scope is pointed too high to adjust to the point of aim at 25 or 50 yds or beyond. So this will probably be going on my father's rifle and I will purchase the Weigand Intergramount  Weigand Ruger 10/22 Intergramount. BLACK . The other option is to get a different scope.Outside to outside of rings is 4.29″. Standard rings are .63″ wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86″, 2.57″, .50″. Height of mounts from top of receiver to centerline of scope tube is - low .94″, medium 1.06″, and high 1.19″.

Built like a tank out of a single piece of precision machined billet aluminum. It is custom made to fit the 10/22 receiver. Once mounted, it looks like an integral part of the rifle. I used medium thread locker to mount on the receiver. Instructions warn DO NOT use thread locker for the long ring screws. These screws are excellent quality and thread firmly into the mount, making thread locker a moot point. I used the mount to put a Nikon Prostaff 3-9x40 on a 35 year old 10/22. This mount holds the scope like a vice just by using the recommended torque on the ring screws. The mount manages to look good, and be unobtrusive at the same time. I had a question regarding the positioning of the top half-rings and called the DNZ phone number. A receptionist answered the phone and put me on with a product specialist in a matter of seconds. He was able to answer my question immediately. This is my First DNZ product. Everything about my experience with this product makes me confident I will continue to purchase these mounts for future guns. They're well made. Perform flawlessly. And are a great value. Couple that with old-school customer service, and I'm sold.

I used this mount to upgrade my Ruger to a 3x9x40 scope. I like the one piece design so I didn’t have to worry about the mount being out of alignment

This scope mount is great! Easy to install and it’s construction quality is very good. I recommend the scope mount for your 10/22. Two thumbs up!

First off, I'm a fan of the one piece design (base/rings), on larger calibers with actual recoil this helps tremendously. On a .22lr, unless your banging your gun around, throwing it in and out of the truck, it's all cosmetics..That being said, the mount is mechanically flawless. The fit to the top of the receiver on the Ruger 10/22 is perfect, however it must be NOTED: there is a material relief (cut out) on the base of the receiver (1.8750" long by the width of the base)... So the product does not match the black or silver pictures. Coming back after receiving mine, you can faintly see on the Camo mount picture that there is a rectangular relief on the base. If I had noticed this before purchasing I would never have ordered this. Actually using my firearms on a regular basis, and simply not collecting safequeens, this just screams "collect dirt and debris!"With an engineering/manufacturing background, the amount of material removed does nothing to the total weight reduction.The deep engraving of the "M" on the front and the rear of the mount is also unacceptable since there is a part number machined on the base as well...As for the silver finish, it does NOT match the Ruger 10/22 satin silver finish on any of the "stainless steel" models. I did not expect perfection when it comes to the anodizing, but it should of at least been close. In fact it's horrible, so this will be painted and relocated to a different firearm.Recommend this product? Yes, if you plan on coating the firearm with some type of aftermarket finish (including scope & this mount), and well it's better than nothing...

I don't understand how this item can receive anything but a five star review! I suffered so long with cheap clip-on rings that looked bad and performed even worse. I love the way the matte black finish contrasts with the super gloss finish of my scope, it looks really good. The machining on this mount is excellent. Beautiful rounded corners, tight tolerances. Total quality. I was initially undecided on the low or medium mount for my 32mm scope. I did not like the look of the low mount, it looked too squashed for me. I'm really glad that I went with the medium mount, gives the scope a little breathing room and looks perfect. Very satisfied and the gun looks awesome!

Ideal for mounting a scope on a rim fire it looks almost like the scope and rifle were made for each other. Locks down with no movement after zeroing in. I paid 102.36 for mine. As of this review they are $54.79 plus freight. Enjoy the lower price, I think I feel the shaft.