TEMO25 pc T20 Torx 6 Point Impact Ready 2 Inch Length Screwdriver Insert Bits Hex Shank with Quick Release Slot

These broke, sheared off, and stripped repeatedly. I finally abandond using them and went to Lowes and purchased the Bosch 3 pack with were dual-heads. I bought 6 packs of those but only ended up using 3-4 packs as they worked perfectly. I built a 3' x 60' long boardwalk (4 - 4" deck screws per 2x6 board) and a 12' x 24' deck (2 - 4" deck screws ever 24"). Solid boardwalk and deck, just frustrating having tried to use this product. Would opt in future and would recommend purchasing an impact grade bit in the future. I like the bosch and will likely use them in the future if given an option.

I've been screwing wood pickets into the interior garage walls. Started with bit included with screws. Stripped it quickly. Went to a few other multi bit kits and stripped then out. Went to Home Depot and bought Ryobi bit. Stripped. Then Dewalt. Stripped two of them.Was frustrated and looked on Amazon. Definitely sceptical but read reviews and figured even if the metal was soft, I would have enough to finish the job. To my great surprise, I went from 40% complete to 90% complete and have not stripped a single bit! Highly recommend and will always buy bits from this seller. Absolutely worth the purchase, don't hesitate!Thanks for making my life soooo much easier 👍

I constantly have to purchase replacement t-20 tips 'cause I tend to misplace small tools. It can be a rather costly to buy a new t-20 tip every couple weeks at $1.50 to $2.00 apiece when purchased singularly. With this purchase I'm only paying about $0.26 apiece. For me that is approximately an 83 to 87% savings! And, the snap box provides me with convenient storage when the bits aren't in use, lessening the likelihood of misplacing the bits.

Based on some of the other reviews, I bought a whole box of these bits with the expectation that some of them would break while I was removing somewhere around 100 rusted-in-place Torx screws. I only ended up using two, after the first one eventually stripped out (as these eventually do). The second bit I used is still in great shape.I can't say whether these are really impact-ready, since I just used them in my electric drill, but they are definitely tough enough for the project I had for them.

Great concept with the twin ends, my oversight by not asking if they would fit my impact driver so disappointed in that respect. Used one 2nd day after I received used about 10 times and one tip is twisted. Not saying dont but but if you are a frequent user consider all aspects

I was rebuilding a large deck with composite decking. The composite screws required a T20 bit. After driving a lot of screws the bits get worn and you need another. This pack allowed me to complete the project without having to go to a store for more bits. Also, the bits in packages at the hardware store cost a lot more per bit than this package. The TEMO bits work just as well or better despite the lower price.

We go through these bits like crazy. 10 guys are using these professionally tightening thousands of screws daily using impact drivers. We found these bits to be the ones to use. We tried most of the options out there, from expensive to dirt cheap, from 1" to 2" variety and these are the favourite ones for us. No matter what we use they all break at some point and these have the longest life cycle for the price.

I had a big deck job, with a 5 friends installing deck screws in Trex. I figured with almost 2,000 square feet of deck, and more than 5,000 screws, with amateurs, we'd break a few bits. Wrong. I think I have 20 left unused. Good bit.

Great value

I bought these to use at work because I'm sick of buying T10 screw drivers every month or so. I figured these would be as weak as the bits that usually come with multi screw drivers but honestly they are lasting so long that its going to take me years to go through them all. Only broke 2 in 4 months. I will be keeping my eye out for this brand/seller to offer other sizes I WILL buy them.

Well priced, and they work.

Not Good Quality

Bonne qualité.idéal pour travaux mécanique sur véhicule euro