Full Motion TV Wall Mount, JUSTSTONE TV Bracket Fits Most 26-65 Inch LED Flat&Curved TVs,Articulating Swivel Tilt Dual Arms Extension Max VESA 600x400mm and Holds up to 121 LB

The media could not be loaded. Perfect mount for my new 65 inch Samsung 8k TV. It's easy to install with 2 people about 30 minutes and has a nice range of motion including front pitch up and down. Easy to level for the perfect fit to your TV. Best $30 you'll ever spend on a full motion mount.It comes with a variety of bolts to connect to the back of your TV but of course none that fit mine. A quick trip to Home Depot and found that metric #M8 16mm with 2 spacers that where provided in the kit that fit my TV. Other then that a very easy installation providing you have a good stud finder.

I bought this mount to hang my mother's TV in her bedroom. The TV is her old unit from the living room, a 42" Screen. I was concerned as to whether the walls in her home (an older mobile home) would be capable of handling the weight. My only disappointment was that the portion that mounts to the wall was not wide enough to align with the studs in her wall. This was more of an issue with the studs in the home as they were not set at a normal width apart. I remedied this situation by using lag bolts to mount a 3/4" piece of plywood to the studs and attached the TV mount to the plywood. This created a solid mount to the wall and studs with no concern for failure. I am a pretty big guy at 6' and 260lbs. I grabbed the mount where it was attached to the wall and was able to lift myself off the ground. Once the TV was put in place we were able to extend the arms to their fullest from the wall with no issues. The TV is more than secure. As a bonus the company includes a small magnetic level and a paper template for mounting holes that make the install job so much easier. I would not hesitate to use this TV mount again.

This is a great kit. Packaged nicely with all the screws, bolts, and other assorted hardware in a plastic belt pouch, with easy to read letters and numbers for each pouch.It looks and feels well made. Just received it yesterday, so will amend review if needed.It was easy for me to install, but you will need some tools, but it does come with a little 4” level which is a nice touch.The instructions could use a little work but were easy to follow.The only nitpick I have is that you have to use an Allen wrench (included with kit) to adjust the vertical tilt. It would’ve been better if had a wing nut. This may not be an issue depending on how often you need to adjust it.Overall, buy it, it’s a great kit for the money.

I got this at a discount during Prime Day and it's a good mount even at the normal price. My TV is technically light enough to be used with a good single-arm mount, but there's no way I would trust a single-arm mount to support a large TV for years or decades. I instead chose to get a budget-priced 2-arm mount with good ratings and am glad I did as this mount indeed feels sturdy enough to last and can hold a larger, heavier TV in the future, if needed.The box comes with everything you need except for the drill and socket driver; it even includes stickers for attaching your template to the wall, which is weird, but nice. It has concrete anchors and multiple sizes of screws and spacers for VESA mounts. There is some flexibility in placement, though this mount cannot accommodate stud spacing much wider than the 16" standard used in most stick-frame construction.I found that the screws for the TV brackets were either too short or too long for use with the black spacers, but the short ones worked fine with the thin, red spacers and they aren't easily visible after mounting. The depth of threads on my TV's VESA mount were very shallow, yet the top pair were inset into the plastic somewhat, but this was not the fault of the mount and I give it credit for including a variety of mounting hardware.The leveling features may not be as easy to use as some of the more expensive brands as these require tools to adjust, but you typically only level the TV once anyway. I managed to mount and level my TV by myself, but I definitely recommend having help to lift and hang the TV and to hold it in position while leveling. Today's TV's are both fragile and expensive, so take your time, ask for assistance, and do not touch the panel or squeeze the edges when lifting; lift by the base and gingerly support the top or sides when moving your TV or monitor.The product information claims that the TV brackets have 2 vertical settings 4" apart, but the spacing is actually 3" apart; I did not detract any points as this is still a feature that many mounts do not offer and it's likely an inaccuracy creating during translation and rounding. It's nice to have the option.Note that I use REAL product ratings, as follows:1 star = useless, probably fraud. 2 star = poor, below expectations. 3 star = good, meets expectations. 4 star = excellent, better than expected. 5 star = best in class, a classic

This is a fantastic TV mount especially for the price that I paid for it. I was little concerned it was going to be flimsy and weak but it's really solid.The range of motion is great.The install was super simple as well but try to have a socket wrench with 1/2" or 13mm socket and a drill with an 1/8" drillbit on hand for installing on the wall. You'll also want two people to help you lift the TV back into place.The only real con is mounting flexibility to the wall. The mount is really only 17.25" wide (See pic). Studs are 16" on center so you only have 1.5" to play with.Other than that I'm super happy with this purchase.

This worked perfectly to mount an older (2009) heavy flatscreen 43" television in my garage. The range of motion is great - it lays fairly close against the wall normally, but can be pulled out and turned side to side as needed. It's sturdy, can handle a lot of weight (I doubt any newer TVs, even very large ones, weigh as much as my older flatscreen), is fairly easy to install (comes with a template) and seems to be adjustable to just about any mounting setup a tv might have.