D'Eco Round Terrarium Display End Table w Reinforced Glass in Gold Iron - 20" Diameter, 26.5" Height- Indoor Decor for Any Home or Office- DIY Garden for Succulents, Moss, Fern- Gift for Plant Lovers

I really adore this table! It was, however, extremely difficult to get put together-more specifically the rounded sides-per the directions. Once it’s together it feels strong sturdy and looks absolutely adorable now that I’ve got it planted!

I purchased 2 tables together. They are really pretty in person and putting together the first one was a breeze, about 30/45 minutes with my cat jumping in lol. Be mindful when tightening the glass that you’re only securing it. so it doesn’t need to be white knuckled tight. Listen for cracking and rubbing at this point and STOP. Side the glass on with the cutout under the little hook/cup things. Don’t make the body screws tight until you have the glass in place-instructions say as much. But if you’re having trouble try adjusting the body screws it may be too tight. It needs to be semi tight but not wobbly. Now let’s hope your tables are like my first 🥴.If you get one like the second box I have....one panel of glass that was not completely arched. It didn’t follow the line of the table so there’s a little gap and it was a .....🤬to get somewhat into place. And I had two pieces that came chipped. I have the protection plan but honestly I didn’t want the hassle of sending it back. I’d rather use it if it breaks and it’s unusable 🤷🏽‍♀️.

Easy to assemble, looks so good. Comparable to an aquarium for your plants.

It looks awesome. It’s really a pain to assemble- I’m no novice at building and assembly and this thing was a nuisance due to poor quality control.The holes don’t line up. You don’t just need to leave the screws loose. In order to manipulate the top to accommodate the curved panels I had to remove half of the leg screws from the top ring to allow more movement. The best way to keep it stable with all the screws so loose was to put a board across two chairs and under the second ring. That makes it so that the legs don’t need to support it while you’re trying to get the side panels in. So everything is really loose, then you put in the side panels and just barely start the screws into the brackets that hold the panels in. Then start pushing the tops of the legs gently to get the second screw started into each one. I had to push and twist quite a bit. Work around tightening all the screws a little at a time until they’re all snugged up. This will ensure you don’t break anything.None of the holes lined up well. One of the glass panels was cut wrong so the hole was no where near the where it should have been. The cuts in the curved panels are not well done and are very sharp.

This is very unique and beautiful in our living room. It’s perfect for our home. I have yet to put my succulents inside. If I had another area for another table like this I would quickly buy it again!

This table sucks. It's cheap, wobbly and impossible to put together. The first issue I had was that it came without instructions. Thankfully a few people added pictures of the instructions to their reviews so I was able to find them. Second, the curved pieces do not fit. I'm not a newbie to building things and I couldn't get this together. There were three reasonably intelligent people trying to put this thing together to no avail. Im pretty sure the curved pieces just werent cut correctly. So we ended up just giving up and leaving the curved pieces out which is severely disappointing because that's the only reason I bought this table in the first place.

The media could not be loaded. Very easy to put together, it feels sturdy and looks elegant. Easy-to-read instructions with pictures after each stage to show you what it should look like. However, the windows that go at the perimeter of the round top do not match up. I loosened all the screws and finally took it apart and re-did the whole thing to make sure it wasn't operator error and they still don't match up. I sure didn't want to have to box it back up and send it back but i am going to have to do it. It is a nightmare since the styrofoam is the very cheap, delicate kind that falls apart if you even look its way. I have requested a replacement. Hopefully, the second one will be better. I really like it otherwise, but it just won't work if the glass window measurements aren't even.

The instructions were fine except for the second ring. I didn't know which way it went but the tabs are on top.Round glass was easy to put in. We had the second one finished in 20 minutes. I would definitely recommend these! I am making a terrarium with the second one!!