Bench dogs for MFT/3 table

Had to sand at the top on all due to a ridge at the top of them (maybe a chamfer) would help

Just don't try to side clamp the larger dogs, they are hollow. Great buy still.

Loved them, and will buy one more. Fit was perfect for my MFT3 and the quantity was generous.

These seemed like a good value, until I put just a little bit of hard pressure to secure a board to a workbench. They seem to be made of some kind of hollow, honeycomb material inside. I broke four of the stops in 1 day, and will be looking for something more solid.

Works well, price is right on.

Too much wiggle on my MFT.

Don’t buy. Cheap home made 3D printed. Sounded good but are not. Over priced for what they are. Buy brand name.

Cheap junk took forever

Absolute rubbish, 3d printed not molded or machined. Tolerances all over the place, some are too big to fit some have 2mm of slop, waste of time and money, will be going back..

For a product which claims to be made in The UK, I am a bit disappointed. Several of the plugs would not fit in the 20mm holes in my Festool MFT Top, because there were still moulding seams on them, which I had to remove. The top ends had moulding burrs on them, which I had to turn off and apply a small chamber in the lathe. All in all quite a bit of time required to make them anything like usuable. Definitely not what I would have expected from UK made product.

Good idea and reasonable price for the concept, but they are a sloppy fit in my mft

2 of the dogs broke within 2 days. Very weak. 3D printed. Would not recommend plastic bench dogs in future. I’ll need to buy aluminum ones.

Okay some of them needed a little sanding to fit in the 20mm holes