IBELL Cordless Rechargeable Electric Screwdriver MS06-16, 3.6V, Li-Ion 1500mAh, Max Torque 3.5Nm, 16 Level with 2 Handle Position

It is a very convenient little tool to keep on my workbench while my bigger impact driver is not around,as most of time I don’t really need a powerful full size driver for light duty tasks.1. Good amount of torque to put drywall screws in wood in a portable, compact design that slides easily in any backpack2. A bright built-in flashlight in the handle.There is also a smaller LED to illuminate the works area when the driver is activated.3. Its body can be twisted and become straight to fit awkward spaces4. Charging is done via a standard Micro-USB port with 5V input and the charging cable is widely available so I never have to worry about losing a proprietary cable/charger.Battery charge indicators are also helpful.5. Carrying case to store a big collection of bits with some small sockets.Overall it's a great tool with plenty of accessories for the money. It's good as a backup or any beginners or homeowners.

Not worth. Not strong to drive a screw.

Good from hardware or what we get for what we pay perspective.Have lithium ion battery which are better form long time charging retention perspective.Have a case, have a set of philps head screw driver bits.We can even drive nuts till size 13.Have extra extension piece to drive in places where the main driver equipment can't go.Have an extra torch light behind the driver.Good when compared to other black and Decker for that price.Works with any micro USB charger. No issues even if you loose your charger.1500mAH battery lasts longer.Cons. The clockwise and anti clockwise direction switch is easily switched off if you hold the item very hard while screwing.Overall a good set to reduce your time and effort.Need to evaluate it for more duration to give more feedback.Conclusion. A good item to all DIY lovers

Its a good product

Bought this because of the accessories including bendable connector that may be useful one day. I've used it for a few occasions and the results are good for me.There is a torque ring with 1-15 steps. Select 1 for the least power and 15 for the max torque. 1 is good to tight tiny screws like toy cars or AC remotes. I usually use upto 9. Then tighten the screws with hand. Loosening is also done by hand first and then the driver. I do this to avoid slipping.Good things are the bright torch, torque selection, wide range of accessories, easy bit changing, rechargeable battery, good backup, etc.One important point is that if we set the torque at say 7, and it fully tightens the screw, then we hear a mechanism slipping inside the driver. This way we don't over tighten the screws and we don't break the driver!Cons are the extension bit has a tiny magnet which holds normal bits. The bits can fall off everytime when torque is high.Another is the torque ring which doesn't rotate with accurate clicks for each step. Feels differently for each step. Say 1 and 2 are tight clicks. I don't feel the click at 7. But you can still select 7. Doesn't feel good. But it works.Final note: My personal experience is that higher torque tends to slip the screws. Select enough torque for the job.Update after 2 years of light use:The driver gets stuck at times. If we want to reverse, first switch it to forward and run it. Then switch to reverse. Also the speed of the driver varies in forward and reverse. It's not built to last. I tried disassembling it. It's NOT using brushless motor. So the armature had to be cleaned. This is not going to last much. May be better to go for Bosch driver.CAUTION: The driver contains 9 ball bearings, 6 cylindrical bearings, a few gears, loads of grease, and a lot of other components. It's not easy to fix it back if you're not used to assembling/disassembling.

Good product

This product is very useful for me

This is not a promising product I want my cash back