LK 6 Pack Screen Protector Compatible with Apple Watch Series 7 45MM Series 6 Series 5 Series 4 44mm, Max Coverage, Compatible with iWatch 44mm, Ultra-Thin TPU Film, Case Friendly，apj02

Quick Summary, my main concerns on these screen protectors is durability, lifespan, and protection. I'm sure you all have the same concerns! This screen protector is VERY thin. There are other reviews that stated they are basically stickers.Cons:-Installation :: PLEASE make sure you watch the video. In fact, watch it at least two times! I casually watched it the first time, and went to the bathroom with the door closed to install (to prevent lint, dust, etc from floating around onto the screen during installation). I failed on step 2 and 3. I am so used to trying to lift the protectors as little as possible to limit risk of particles floating underneath. You HAVE TO lift it half way, that way the hard plastic liner between your screen protector and the white numerical directive sheet can be pushed out leaving the protector underneath and squeegeed.- Thickness :: I tried the Skinomi Brand (must apply liquid spray for install) screen protectors before this. Although, it was thicker, it was also less responsive. I decided to try LK because my Caseology bumper was pushing the edges of the screen protector up.- Finger Prints :: In direct light, you will see the oil residue from your fingers on the screen if you have not cleaned it recently.Pros:- Installation :: After screwing up the first time since I thought I was smarter than the product designer; I did it again the correct way. It looks pristine, as if there was no protector at all on my watch.- Responsiveness :: Maybe it's because it is so thin, but I literally cannot tell there is a screen protector on my watch. It is only slightly less smooth than the original glass on the watch.ALL in ALL I am pretty satisfied with my purchase. I have 4 out of 6 sheets still, and will update in 2 weeks if anything changes.Update 5/17/20The screen protector has held up great. I have used it with the Caseology bumper and the two have performed admirably together. Unfortunately, when I tried to take off the bumper to see how the edges of the screen protector were holding up, I Inadvertently peeled the edges up a little myself. Odds are if they start lifting it was due to user error. It gets scratched randomly, possibly when I reach into my pockets and it brushes against keys, and 80% of the time has healed. So far so good!Update 5/19/20- Okay I ended up using all 6 !! 3 of my screen protectors were defective and the 3 tab stuck with the 1 tab. This made it difficult to install without lint getting under the protectors before I finished the install. Also, one had a line across the middle that I could not squeegee out. I am now testing the warranty. Hopefully, they will honor it. If they do, I still believe this product warrants 4 stars.

This is a good product overall, but I have had some difficulty getting it to stick on the watch for the long term. I’ll give you some pros and cons of this cover/protector.PROS:It’s easy to install as long as you watch the video. (The video is super helpful when you get to actually applying the screen protector.) There are a few stages to the install process. One involves taking a sticky foam ring to hold the watch in place, then a alcohol wipe to eliminate grease, then a sticky item to get any excess dust, THEN the screen protector that is applied in four steps. During the four steps you are pushing air bubbles with a card like item that is provided. The end result is a well placed screen protector that normally has a bubble or two that I CANNOT get out. However, they do get out overtime as long as dust is not the culprit.When you have the screen protector on, it is very clear when looking down, but you can see some lines if you tilt it and the light catches the screen.Touch capability is not impeded at all. I was worried about that a lot, but it is just as sensitive without the screen protector and it is with it on.You receive SIX screen protectors! This means that, if you screw up, you still have some left in reserve. I also have come to realize that six screen protectors is necessary, as I will explain in a moment.CONS:It tends to get roughed up easily and quickly. I don’t think this is a defect of the product, but the nature of a watch that is attached to a wrist that swings constantly. I tend to go through them about once a month, but get only about 3-4 days of pristine condition, and then it goes downhill pretty fast from there. I attached a picture of what it looks like after about 7-10 days of normal use.All of that aside, it does protect the watch, and seeing the screen in its tattered state makes me realize how much of a beating I put my watch through.SUMMARY:If you are looking for something that is not a bulky case, then these are a good option. However, just be prepared to be replacing them at a pretty frequent cycle if you want the watch to not look like it has a poorly applied screen protector.

good product

This Screen Protector is good but it could be better; it is Compatible with Apple Watch but it gets bubbles over time, even if when you originally put it there were no bubbles, which is kind of annoying as it doesn't look as clean. It is Case Friendly as it is very thin and it avoids scratches so overall gets the job done. Touch Screen is responsive, Easy to install but Adhesion could be better.

This is my second time ordering this product. The film is thin and longevity isn't great, but unlike a hard plastic case, this is nearly invisible. Protection seems to be excellent. I subject my watch to pretty rough conditions doing heavy yardwork, building retaining walls, and doing indoor projects like the framing to finish my basement. So far no scratches on the face of my watch. When the one on my watch starts to peel off, I remove it and put on a new one. Installation is quick and simple.The kit comes with a pad to hold the watch in place while you install the protector. They've made a huge improvement with this - instead of a ring with really strong adhesive (so strong it once pulled the fake woodgrain off the surface of my desk, leaving a visible ring), the pad is now silicone. It's sticky enough to prevent the watch from sliding around, but it doesn't adhere to the surface of my desk. They've also simplified the process by not requiring you to remove the watch bands from the case.The installation video on the Amazon product page shows the old placement ring and installation process. The product I received this week has a link to a new video showing the improved process.

I bought these before and decided to install them my own way because the instructions were boring. So after buying then the second time I finally watched the instruction video and it made installation that much easier. Good product , my watch feels safe from a rock falling on it but don’t dare catch it onto a twig. The adhesive conduit breaks free and it’s done. Put on a new one.

Lo compré para un Apple Watch 7 de 45mm, le queda sin problema.

It was almost too big for the display. The edges that were hanging over the flat face would not stick, and then the rest of it peeled off.

The video made this easy to install and I’m not very good at putting on screen protectors. This came with 6 screen protectors so it will last me a long time.

All the edges coming off after couple hours