Mannial Fuel Tank Shut Off Valve Petcock for Chinese Generator 168F 163CC 196CC 170F 208CC 211CC 173F 177F 182F 188F 190F GP5000 GP6000E Generator (16mm x 1.5mm)

This fit my ETQ TG72K12 8250 14hp 420cc generator after the original valve started leaking gas. We will see how it hold up over time. I would be very cautious with over-tightening the nut as it feels like the metal could be stripped or pulled apart. I used some teflon tape to try and get a good seal.The included fuel hose is the wrong size however. It's a 1/4" which is too big for the smaller connector on this valve (and my carburator connector). So if you also need a fuel hose, you will have to buy that seperatly.

I ordered this because none of the local hardware stores stock replacement parts for the products they sell anymore.Piece of junk. Installed new petcock, added fuel to tank, and fuel started leaking. The petcock doesn't seal when in the off position, fuel leaks out of the on/off lever. Also, the clamps provided with the fuel line don't apply any pressure. You can slide them off the line without opening them up, so the fuel line leaks when the petcock is in the on position! Utter waste of my time.DO NOT BUY!

Just perfect!

Not even close to fitting any generator (7) that I had on site. Not sure what it actually goes to

Excellent!

The depth of the nut is not sufficient. Will barely thread on while oring is installed. Could not use safely.

Pay the extra money and get the factory replacement. This part leaked gas and separated when tighten to the fuel tank.

Piece arrive broken and missing the plastic tube & clamps. Appeared to have been a previous return, bag was opened.