Porcelain Repair Kit White, High-Gloss Porcelain Sink Repair Kit White, Porcelain Chip Fix for Sinks, Tiles on Enamel, Acrylic, Fiberglass, Ceramic, Shower Kit & Tray

The instructions are pretty basic, I found that it thickened up a lot after about an hour which made it easier to controlI used it to fill one small ding and one large chip in my bathtub.Masked off the area around the repair with tape, applied the epoxy and removed the tape when the epoxy was thick but not hardened (about 2 hours)Sanded just the edges at the 8 hour mark and they smoothed out well.I don't think I'll be sanding the large chip as it's drying very smooth.I did notice that as the epoxy cured it's no longer even with the tub surface, but that chip was almost the full thickness of the tub so as long as the patch stays in I'm happy.As others have noted the epoxy is pure white.My apartment tub has yellowed with age and hard water, but the white epoxy doesn't stand out enough to be really noticableI forgot to get a before pic, but the chip in the photo was almost the full thickness of the tub.I have enough leftover to fill in the depression if I want to, but it cured really smooth so I'm leaving it for now

Works great! Thicker and can be built up to fill deeper cracks and chips. I had a small hole in a sink. I was able to fill the hole and has lasted for several months so far.

Did a fix on a cracked and rusted sink overflow drain. Instructions were easy to follow, and the repair came out well. I will need to go back and touch it up to cover some missed rust stains that leaked through. The color match wasn't perfect, but certainly much better than I expected. The cracked, sharp edges were adequately repaired, so my safety concerns (cut fingers) was taken care of. A good choice.

First time user. Prep work was easy, mixing the product was easy and the dry time was fine. I did find the mixture thicker than expected which made it hard to make smooth/blend in to the surrounding tub area. The first time application (about 1"x1" area) I wasn't happy with so I removed it. I found also that there is basically one shot at making it smooth -- there's no fiddling with it. I prepped the area again and applied again, but still had the same problem. The area is in a spot that isn't very visible, so I smoothed and sanded the edges as best I could and left it. There was another very small rusted area and I had better success with it.Upshot: I'm not sure I would use it again; but it could be that I just am not good at it. But for the price, it was worth a shot.

This product is pretty amazing. I used it to repair my acrylic shower floor which was burned by my bath fan catching fire. The product is a bit difficult to work with. It is thick, heavy, very sticky and gooey. I didn't measure it out in parts, I just put container A into B, mixed aggressively, applied slowly and used a lot of patience. The results were great. Once dry, this product blended well with the acrylic even keeping the shine. Pictures are worth a 1000 words so see the before and after below! Beats paying $12K for full bath replacement.

When the product arrived, it was apparent that it had leaked a little. The lid of one of the jars was not able to be opened due to that. Still, I thought I would try it because I only had a very tiny crack to fill in a bathroom sink. After using a power drill to open the darn lid, and reading all of the directions completely, I mixed the two jars as directed and used the plastic spatula included to fill the crack. It is exceptionally easy to apply too much of the mixture. And the more I tried to remove the excess, the stickier and messier it became. I am an experienced DIYer, and have completed many many renovations and repairs with no issues and nearly professional quality. This was flat out the most terrible repair project. I spent more time and energy filling one tiny crack. I finally got the product into the crack and smooth using only white applicators and smoothing tools of my own. The crack is still noticeable. The product is supposed to be color matching. My sink is white and is an American Standard, which is the brand the description says the color will match. It never changed. Instead, it turned a very light beige. Due to the time spent on this project, the problems beginning from the time I opened the package, and the new necessity of touch up paint, I decided to scrap the project and bought a new sink. I do not recommend this at all.

Worked great. Fixed a coffee handle. Survived dishwasher many times

Great product, easy to use. I had a couple of small items that needed some chip repair. This was just what I needed to do the job.