The UWELL Block has a proprietary chipset allowing it to have a maximum output of 90W. Power output of the device is based on the current state of the battery and is advised to use a battery with a minimum amperage of 30. Sliding the top portion of the Block will enable users to access the battery. Powering the Blocks is a single high amperage 18650 and is housed on the upper portion of the mod. When firing the LED light will correspond to how much battery life there is; Green being high, blue being medium, red being low.Along with the UWELL Block Box Mod is the Nunchaku bottom fed rebuildable dripping atomizer. The Nunchaku has a diameter of 24mm and features a dual post clamp style build deck. Each terminal can be accessed with a Hex Key and features 2.5mm by 3mm slots for either single or dual coil configuration. Airflow enters the Nunchaku through dual 8mm by 2.5mm airflow slots and can be adjusted fully with two airflows open or with one. On the bottom, users may choose to use the Nunchaku as a regular non-bottom fed RDA or with a pin which comes pre-installed.Features: Proprietary Chip 90W Maximum Output 0.1 to 0.5 ohm Minimum Atomizer Range Bottom Feed Bottle Requires: Single 18650 Battery Single Button Control Face Oversized Firing Button LED Light Indicator Circuit Board Protection Short Circuit Protection 24mm Diameter Two Post Clamp Style Build Deck Single Terminalsl Top Mounted Hex Screws Large Build Area for Specialty Coil PEEK Insulator 4mm Deep Juice Well Adjustable Airflow Systems Single or Dual Airflow Tapered 11mm 810 Delrin Drip Tip Bottom Feed 510 Pin Pre-Installed
Trustpilot
2 months ago
1 month ago
