ModwayRender Vanity with Sink-Floor, 24 Inch, White White

All the reviews by buyers who had someone else do all the work, saying "I love it, it's cute!" and "My best purchase!" are, I'm sorry, not useful. Let's talk from someone who did the actual work.I bought the 24 inch oak version with the included porcelain top. The vanity arrives in 2 somewhat large boxes, one for the woodwork and one for the top. Make sure you inspect both for damages before your return window expires.With a lot of experience putting together RTA furniture, this one offered no surprises. You'll need a good-sized work space as at one point the instructions have you assembling several larger panels together, which means they all must be prepared beforehand with their camlocks and matching cam bolts all properly inserted. The assembly not only went well but I'd say that, for RTA, the construction is very nice. Interior, full metal corner braces for each corner are supplied; soft close Euro hinges, quality RTA hardware and a shelf are bonuses here.There are many things to note:- the unit is 18- inches deep which is great for smaller bathrooms but note that means normal vanity tops (all 24 itches deep) can NOT be substituted. Their is a black version of the top available separately on Amazon - white or black are your only choices.- the material is MDF with a good and heavy laminate. Still, you get it wet you're going to be hating life as it falls apart. Keep it dry, dry any water spilled on the wood surfaces during use. As my vanity is close to my shower I polyurethaned the legs prior to assembly to prevent damage from shower spills.- as others note, the shelf is solid with no accommodation for plumbing. You'll have to cut the shelf to fit if you actually want to use it. But it is very handy indeed, so the effort is worth it.- if you *do* install the shelf you'll need to install the shelf brackets. You must use HIGH FORCE in pressing the screws into the wood whilst you turn the screwdriver to drive the screw in - if you don't, the wood will only shred itself. This is a typical response of MDF and not a specific failure of this product, I knew from previous experiences. PRESS HARD!- the boards are indeed marked for assembly but only on one edge with smaller printed-on numbers. Look for those markings.- the Euro hinges can be adjusted up, down, in and out in relation to the cabinet frame. If your doors do not align then you must adjust them yourself. Mine needed a bit of adjustment, nothing major and nothing it couldn't do.- the top simply rests on the vanity using supplied pads. You may be able to affix it permanently with adhesive but it may be difficult due to variances in the panels after assembly. The pads are fine and the fit is solid with them.- the oak is more 'white oak' effect with almost no 'red' in the color mix. The effect is much 'cooler' in tone than the picture suggests. Still, very nice though.- the top is high quality IMHO, very nice. The sink is a good size, not super deep nor super large but a good overall size considering the vanity dimensions. Get a faucet with a large reach to place the water flow in the middle of the drain spout. I got the Delta Broadmoor - it's PERFECT.- if you want a backsplash finding a match to the finish is almost impossible, it's gloss porcelain. Tiles work; the available backslashes are all either cultured marble or solid surface, all of which have a different surface texture. If you're OK with that, no problems.Once assembled the unit is solid and really great looking. Overall very happy with the unit - just keep it dry!

I like the size, material and especially the style.

This was a fantastic purchase, I would recommend this vanity to anyone looking to make a statement while not sacrificing function. We just assembled this today and it feels sturdy, has a good amount of storage and looks absolutely gorgeous. The wood grain is perfect and exactly as pictured. Love this and would buy again 100%!

Beautiful vanity, easy to build, however there are some flaws in the build. The first proboally being an old house thing. The pluming in my bathroom is quite low to the floor, and the suport peice in the back was too tall. I took out the suport and its sturdy enough to be without but just something to be aware of. The other thing is that the holes for the shelf brackets were too small so i wasnt able to put those pieces in. Not that i could have put the shelf in anyway because there wouldnt be room for the drain. I ended up just putting organizers. Still solid peice decent amount of room

I will say putting this vanities together was a lot difficult than we thought and the instructions were clear so it may have been using error but it did take about an hour and a half to complete. It's not light but it's not heavy at all.

This is the second time I have purchased the modway vanity. The first time was great with my original review below.Sadly: The second one I purchased arrived damaged and also was USED even though I bought and paid for a new one. I knew it was used when I saw the tape over other opened tape on the boxes. Same with the inside: Tape over broken tape. To make it worse: They didn’t even bother to remove the previous purchasers RMA return paperwork!This is beyond “not OK”. I should have at least been given a used item discount. The unit is scratched and one of the pieces for the top was broken. Clearly this was returned because it was broke. Somehow it made its way back to me at full price.I am very disappointed in Modway. It was their tape that was over the broken original tape, too! So I know they got it back, packaged it again and sold it as new. NOT OK!This product came packaged very well and was VERY heavy. The top came in a different package and was also heavy. That’s a good signI assembled the cabinet in about 2 hours and noted how sturdy it was. It’s a beast! The hardware is good quality with nice hinges that close softly.The look is incredible. Know that this cabinet is pressboard with a thin veneer. It dents easily and can also scratch easily. I worry that when it gets wet, it will warp easily as well. Keep it dry!The doors open and inside is a nice space for your things. I was able to avoid cutting the middle shelf by setting it on its 2nd to lowest peg setting. It’s fine and will hold lots of things.The top is well made and fits the bottom as expected. There is no overlap so be sure you square it to the wall and cabinet.My one complaint is that the feet at the rear are too close to the back which will make it difficult to get baseboard behind it and have a clean flush look to the wall. I’m thinking about removing them and using screws into studs to hold the cabinet to the wall.Overall this is a nice vanity for the price. Just know that it’s small, can’t get wet and the rear legs are too close to the wall. Otherwise it’s really incredible!

Perfect and very happy to assemble and easy to install

This looks great for the money.I put it together easily until the doors which had to go on after being installed and they are a little tricky to get screwed in.The shelf inside I couldn’t use because of the plumbing, not sure how anyone could.