Solder Paste(Sn64Bi35Ag1), Silver Tin Paste (30g), No-Clean Soldering Paste For Electronics Soldering by Essmetuin

Works well at a low temperature compared to the spool solder I have been using. Easy to apply with the assortment of applicators. This amount should last me many years on my projects and repairs.

Works like it should

So the good: Exactly as it says, solder joints are shiny and not dull like typical non-leaded solder. I used it to install a modchip on my Switch and everything worked out great!The bad: this paste is absolutely not 138( or what the side of the paste says which is 170??) C. If you want your paste to actually flow like butter and create good joints without applying continuous heat to your board, don't use either of these numbers LMAO. Instead I used 500F (260C) on my Switch, very low for what the recommended temp is for Switch modding (350-375C) but like I said, it flows smoothly with a little tap at that temp so why risk burning parts with the latter? Additionally, the paste is VERY liquidy and so definitely practice using it first on some spare board before applying it to the real thing you wanna use it for, it might take multiple applications of paste, solder, paste, solder if you want to actually see what you're doing without a gush of clear liquid everywhere.The ugly: the Syringe tip is absolutely impossible to control. Not only is it very liquidy so it floods out when you finally get it through the syringe tip, but you practically need both hands to apply pressure to the syringe too. It's incredibly difficult to get it out with the current applicator and so I transferred some over into an extremely tiny 1ml syringe and while the pressure is still a bit difficult, it doesn't overflow out the tip and I can get the very precise, miniscule amounts I want with whatever pressure I apply.

esta pasta parece solida y no sale por el pequeno orificio ademas no pega donde uno quiere soldar no le recomiendo esto a nadie pues parece barata pero no sirve o sea sale carisima !!

I purchased this paste I had a couple l o r a 915 MHz chips and the headers are extremely close and small. I'm an experienced solderer and my first time soldering 915 MHz chip was very difficult almost impossible. With this paste all you do is squeeze it all over the contacts and use a heat gun in the solder sucks right to the points as though it came out of the factory that way. So I definitely recommend for the beginner and the advanced solderer

I am VERY novice at soldering. I just wanted to solder wires to an XT60 connector and my soldering skills failed me (guess I need a lot more practice), but this soldering glue helped me make it happen. Now only did I solder the connector but I also soldered on a kill switch button as well. Very strong hold (after I covered it with heat shrink, looks perfect! I will definitely keep this in stock for my needs!

it's on time & is a good product, respect product description

Took time for it to flow then would not set up.