VEVORG29 G920 Racing Steering Wheel Stand,fit for Logitech G27/G25/G29, Thrustmaster T80 T150 TX F430 Gaming Wheel Stand, Wheel Pedals NOT Included

The media could not be loaded. Llego a Ecuador después de casi un mes pero era algo que esperaba buena compra super económico buena calidad resistente fácil de armar solo como sugerencia los nombres escritos de cada tornillos letras mas grandes y que se entiendan en el manual fue lo único que me pareció complejo tuve que usar el aumento de la cámara del celular de allí lo demás muy bueno excelente me ahorre un 100% si lo hubiera comprado en mi país fue una buena oferta y única de oportunidad gracias es práctico no ocupa mucho espacio

After doing some research and comparing affordable prices. I decided to go with the Mario Kart Steering wheel. Feel good quality. Plug and play. IT WORKS GREAT WITH NEED 4 SPEED HOT PURSUIT REMASTERED.Very Happy with the purchase. This was a early Christmas gift for my daughter.Thank you Amazon.

.

It's easy to assemble and fold up. There are screw holes in place to fasten down your wheel, pedals, and shifter. The height is adjustable and so is the steering wheel angle.

Device is sturdy, but once you install the gear-shifter to it, the weighting is off and it nearly tips over if you put any real force on it. Using the Logitech G920. I am going to have to get a counter weight for it in the front or it wants to fall backwards,Something to consider if you don't have it hard-mounted (mine's on carpet).Being used largely by a 13 year old, but we have to use kettle bells as counter weights currently.

got this for my logitech G923 wheel. the directions for me were clear and easy to follow. a few things though i will say. i would suggest putting the bottom antiskid foot screws on first. for me that was step 3 which then required to have to put the unit on its side etc.also step 1 for me said to use m8x36mm screws for the back part of the foot pedal base. i suggest using the smallest size m8x22 and then when you have to mount the table for the wheel, use the m8x36 screws, 2 of them and then the other 2 the m8x22. you dont have to, but if you do want to adjust the foot pedal, its easier to unscrew the shorter screw. and for the table part, its held by a nut, so once loose, its easy to unscrew.other then that, i did not make everything tight at first so when i did have to place the table on, the 2 legs were to far. once i tightened up a few screws, then it was fine.with forcefeedback and all, i had no issues with it shaking to much at all. felt solid. the pedals, i put the angle all the way up, and my pedals stayed without sliding and without needing to bolt in.the product came with a few extra screws to use if need for pedals, wheel, shifter etc. did not need them. might need for shifter if i get one.over all, glad i got this to use. folds up if you need room.

Easy to put together you’ll have some fitting issues at first but once everything is tightened it’ll be solid

I had just got a G29 Racing wheel and realized its kind of uncomfortable to have it set up at my desk and it's a bit cumbersome to remove when I'm not playing any racing sims. So I was excited to get a mount that I could set everything up on and just move out of the way and or fold up when I was done.Unfortunately this mount is just designed poorly. I totally understand it having some flaws because it's cheap but it really just sucks.The Footing is alright I guess. Like others said the feet will slide like crazy so it needs to be butted up against a wall or something sturdy really. Once you slam on the breaks its going to shift.Now for the good parts. The two arms that hold the tray wheel and the shifter arm mount get bolted onto two 1/8inch flanges that are vertically welded to the bottom frame. It makes the whole thing wobble like crazy because the 1/8th inch plates just bend. They really should have just forgoed the option to fold it and welded a square bracket to the bottom frame for the arms to bolt into. At least then it would be sturdy.The next great part and probably my favorite. The shifter mounting plate bolts to another arm and the mounting point is another 1/8th inch plate of metal. If you have the G29 shifter it becomes really laughable because you have to press the shifter down and over to get into the reverse gear which ends up bending the elbow where it all bolts together. It's just a stupid design really.I hate returning stuff so I really tried to like it but it's awful. Don't buy this thing. I'm probably just going to spend a bit more and get something better or just try to build something. Stay away from this hot garbage.