Split-Phase Solar Inverter 10000W 48V to 120/240V, UL1741 10000W Inverter 48V Built-in 200A MPPT Controller and 120A AC Charger, Can Batteryless Run【Can't Parallel】

Works well. I have it connected to 6KW of solar power and 30 KW of LiFePO4 battery power. It has supplied full power to our house with no issues. It replaced a pair of Growatt 3K all in one inverters that were on rare occasion a bit too small for our power demand. I use a variable speed inverter heat pump HVAC, a heat pump water heater, a microwave, and a heat pump dryer, (gas stove). Through two Hurricane power outages, the lights stayed on, even powered a fridge next door.

Any trick in getting data logger installed? Ordered logger from PowerMr web page for 10k inverter. One green light on logger comes on nothing else. Contacted PowerMr support and they want a picture of it not working.

I do not like the way cables are supposed to connect to the unit. There is very little room, if any, for conductors. For example, the unit comes with crimp lugs, which is nice. But it would be nicer if they fit inside the unit! They hang from inside the unit where they connect, to outside the unit, making for a fire hazzard if they come in contact with the metal frame. I think this product should be recalled for this reason.With that being said, it seems to work fine, and is much easier to program than my last inverter.I would give the inverter another 2 stars if they would just add two inches of space to the bottom of the unit so a person could get a conduit fitting to attach to the inverter without interfearance. I am now going to have to order a $300 wiring gutter to fit onto the bottom of the unit to make the wiring connections safe.

DID NOT WORK!

Just received this and got it installed the very same day. So far it is everything that it was advertised to be but, I will have to give it a couple of months to see what the effect is. Very easy to install and the response to my questions came very quickly. I am thinking I might just order a second unit so I can power everything on the property.

I hope I don't jinx it by putting in a good review, but it has been great so far. Running for about 5 months now. It even has enough oomph to run my 6hp air compressor.Update:Having had it up and running for about 7 to 8 months now, I was really satisfied with its performance. Especially on the inverter side. There is always plenty of power coming from the unit. The problem I'm having is on the charging end. For unknown reasons the unit has stopped charging properly. It used to keep the batteries full at all times going into a sort of float charging mode. Now it only charges sporadically with no rhyme or reason. I have checked solar panel output and it is getting plenty of power from the panels. Even when I hook a generator up to it. It still does the same thing, so it's not a power in issue. It often lets the batteries go down to zero before it starts charging again. Sometimes I can get it to start charging if I turn it off then turn it back on. However, that does not always work and obviously it is a pain in the neck if I'm trying to have an automated system. Sometimes the unit will make a squealing noise when it goes into the charging mode as if one of the fans is binding up, but that is clearly not the cases. I can hear the fans roaring. I have not changed any of the settings since I had installed it so nothing has changed. I have gone back and rechecked the settings to make sure they were all correct. I later tried changing the settings to see if maybe a different charge rate would help. No luck. The unit worked great for the first 6 or 7 months and is now worthless to me.

I got two of these; one worked, and the other didn't. It misread voltages and had alarms that beeped constantly.Customer service was the worst I have ever had (there was no US number to call, and communication was only through email). Initially, the company seemed helpful, but in reality, they delayed and delayed until I gave up.There is no customer empathy, and I will never buy from them again.