GGStudy Automatic Sensor Matte Black Touchless Bathroom Vessel Sink Faucet Vanity Faucets Hands Free Waterfall Bathroom Water Tap with Control Box and Temperature Mixer

Water comes out with higher pressure than expected but it’s a good thing. Has worked seamlessly and looks really nice. Batteries are easy to install and packing says they last up to 7000 washes off the top of my head.

Looking good and working great.

Had to turn water down. Comes out fast and splashes if you don't

We had to return this for the following reasons:1. The temperature adjustment is in the cabinet, not the vanity top. Real pain to change it.2. There is no way to change the force of water coming out. In our case, it was so strong it splashed everywhere.3. The sensor has such a short distance that you cannot, for example, put a toothbrush under it and get water. You have to put your hand behind where the water comes out in order to trigger the sensor and then put your toothbrush under the water.4. It turns off immediately when your hand is removed from the sensor. So you need to keep triggering it if, for example, you want to wash your hands.It looks well-made, but isn't really designed for household use IMHO.

The media could not be loaded. It is pretty, looks nice but….You would definitely not want this faucet for your main bathroom. The short burst auto-shutoff does not allow you to fill the sink with water, say to shave…. It is very similar to going to a retailer bathroom and the water keeps shutting off on you. There is no way to change this. Because the sensor is preset to a short distance, it doesn’t pick up your motion. If you keep your hands close to the sensor, then the water splashes all over. Please note, like other reviews, the pressure comes out really high. Fortunately my valves below the sink are ajustable. Many newer valves, like shark bite, are only off and on. At full power, this sprays everywhere and the mixing valve doesn’t adjust pressure, just temperature.Also, the faucet requires a good size hole, so I had to open mine up some….The install would not have been terrible if not for the hole size. They did not use the more modern, easy mount for the bottom faucet mount..the product seems like good quality if not for the poor planning on the auto shutoff or run time. See video

Appearance 5 stars ease of installation 4 stars performance 5 stars I like the fact it’s water saving and stops the kids from continuously running the water.

Easy to install. Sensor works with hand motion. But adjusting the cold and hot water wasn’t that simple. Keep that in mind. Overall good product if your using just cold water as a single line.

INSTALLATIONI am not sure if it is just my sink but the mounting stem is too big to fit through the center hole of my sink. I have to spend time to cut down the diameter of the stem. The result is that the faucet is just ok attached to the stem.OPERATIONAlso the solenoid valve (which is plastic) leaks. I have to put plumbing sealants in it.Since the faucet is slightly aiming outward, you may need to reduce the water flow if you have a shallow sink to avoid water spilling out when turned on. Also you need to adjust the water flow for when your toilet is refilling if you use this in the bathroom. The water pressure could be too low if you just adjust it when the toilet is not using water.