Titan FitnessHD Multi-Grip Wall Mounted Pull-Up Bar, 48" Wide Grip, Rated 600 LB, Strength Accessory

Sturdy and well made. I love the grip layout on this bar, your pull up variations are literally endless. I have also attracted Olympic rings for even more options.FedEx destroyed my package and the bar was scuffed up. Titan responded within minutes and helped me solve this issue.

I'll come back to post pics. yes hardware to install would be nice, but people install to diff. surfaces and would need diff. hardware.I used 2 2x6 boards to mount to studs. I would recommend using 2x8 if I did it again. I anchored them with 8 - 5" lag bolts at the outer edges and 12 - 4" structural screws at the middle studs.for anyone having problems getting the lags in that are on the upper side of the bottom bracket. mount the top section of the pull bar first. drill your pilot holes in the correct location for the bottom brackets. once you've done this, hand thread in your lag bolt with the bracket free. tighten the bolt down almost all the way then reattach the top of the pull up bar to the support bracket with the supplied bolts. you might have to flex the upper section to align the bolt holes. if you don't do this you'll have to angle the lag bolts in.I had both my 2 sons on this and myself and it's holding strong. roughly 300lbs. My wife has said the bar is smaller diameter than our current pull up bar. I don't think it'll be an issue. I do like the fact that I can finally do wide pull ups again. Being able to reach out the entire width of the bar is nice. I also like the different angles on the hand holds.

Very sturdy unit once installed. Definitely suggest using a 2X8 board for mounting as in the photos.

I received the Titan Fitness HD Multi Grip Wall Mounted Pull Up Bar from Amazon.I am disappointed with the quality of fit of the components. Titan states that this can be mounted on standard spaced stud walls. This mounting does not really fit well for standard wall stud spacing! The span between mounting holes is over an inch too wide! Because standard wall studs are only an inch and a half thick, the span between the bar’s mounting holes needs to be pretty close to 48” to ensure lag screws can be screwed near the middle of the studs. The 49 1/4” dimension is not acceptableI could loosen all the nuts and bolts of the components and force-mount the main arms to the 48” span and then re-tighten all the components, but this would cause the arms to be angled slightly outward and leave unacceptable gaps between parts of the multi-grip bar and the main bar. Besides being an an “inelegant” solution, I think this would compromise the overall rigidity and strength of the unit.Because I wanted to have use of a pull up bar quickly, I did not want to have to return this and re-order a different product. So I worked around the flaw and mounted the bar to pieces of lumber which are mounted to the wall.There was no instruction included with the bar but I dont feel one would normally be needed. I am aggravated with the poor quality of construction of the pull up bar. I feel that manufacturing such a unit to be close to the 48” mounting dimension is not a difficult thing. Only poor quality workmanship can contribute to such errors.I cannot give this product a good rating There are other similar products available that are probably dimensionally correct.

Product is heavy which means quality.....but BOTH times arrives in cheap china cardboard that was damaged in shipping by UPS and with pieces missing or damaged. Not happy

No instructions but a fairly easy install. This is definitely a two person install though. It would have been nice to have a wall template to use. Trying to hold it up and make drill marks wasn’t easy.

I really like the sturdyness of this item. Feels very strong and secure. I’m only 200lbs so I have some room to gain muscle:-) I also like that it has 600lbs rating which is one of the most that I found. I really hope to increase my pull up reps. Thank you Titian Fitness.

5-Stars for fast delivery and stout equipment! Most reviews complained about fabrication and welds but it aesthetically pleasing and welds are fine, didn't buy this to brag on welds! Deducted a star because no matter how much you prepare yourself reading the reviews about damaged boxes, seeing a damaged box instantly causes anxiety related to possible missing parts! But everything was in there except the instructions and someone with lesser building intuition might need them. Does not come with mounting bolts but that's fine because I always need an excuse to go to Home Depot. Fix the box issue please!