Goplus Hitch Cargo Carrier, 50"x29.5" Aluminum Wheelchair Scooter Mobility Carrier with Ramp, Trailer Hitch Mount Cargo Carrier for Truck SUV Van Car,500lbs Capacity,Fit Class III or IV 2" Receiver

Excellent customer service, they provided everything I needed to assemble the carrier. I'm gonna use it to tow my free electric tricycle. It is sturdy enough that I would recommend this shelf to anyone. Good cost performance, decent quality, easy assembly, long service life. Value for money!!

Poor assembly instructions and pictures of carrier no legible enough to assist in assembly. Otherwise, I was able to put it together

I bought this specifically tow my wife’s belly scooter behind the car one on trips I ended up not using it for that purpose because we were worried about water spray getting up and in the electronics of the scooter. I tried to find a plastic tote/box, but they were either the right length but too wide or the right width, but too long or short, so we ended up using it as a storage rack for our luggage ice cooler and other miscellaneous stuff that we could put in large plastic bags to protect from the weather. I also bought a piece of hardware that when connected to the tongue of the carrier and the trailer hitch tightened it up so nothing moved after 3000 miles. The only thing I really noticed was that for some reason it “looks“ like it’s bent from too much weight. But when I took it off the car and checked it out, it’s just an optical illusion I guess because it’s straight and solid as it was when I put it together speaking of putting it together you will put everything together on this thing every nut and bolt and there’s a lot of them. On the trip the carrier performed well. The ram stayed up and in place and did not affect the gas mileage of the car. The only negatives that I could see are that the ramp is on too steep of an angle for a mobility scooter to be driven up and on it once the front wheels get towards the middle of the ramp in the back wheels up against the ramp, there is not enough power in the scooter due to the angle to drive up. So it’s much easier to manually push the mobility scooter on until the carrier lifting it up either in the front or in the back as needed once it fit inside the scooter just fine. The plastic tips at the end of the ramp seem to want to loosen up during the drive or when you put the ramp down on the ground, I never really figured out which one was the culprit. My only other concern is that it is very soft aluminum when installing the eye bolts that are to be used with straps to hold down your mobility scooter in place while driving I over tighten them and the metal not only bent at the hole where the boat was but also split so I had to go get a bunch bigger washer, so that the bolt in the washer they gave would not fall into the newly created hole that I made from bending the bottom strut. But that in itself is a minor issue. The only real concern is, if you’re using it to haul around a mobility scooter alone, you may not have the strength that would be needed to get the scooter up and on the carrier as needed without lifting up by the front or the back of the mobility scooter or both on putting it up the ramp. Comes well packaged and boxed but if you need to return this (I was going to because of how soft the aluminum was), you are going to pay the money needed for the return which when I checked was nearly half the cost of the unit itself so I just kept it. The instructions are a little lacking in some areas, but easy enough to figure out.

This is a great trailer hitch attachment that is lightweight that also has the ramp. The only issue is opening the back tailgate of the SUV with the ramp propped up in the Lock position. I replaced the bolts with removable pens, so the ramp can easily be taken off when in storage or if it’s not needed for transporting equipment. It would be even better if it included some kind of rubber or plastic bumpers on the back so the reflector wouldn’t get scratched up if stored on it back end.

It's all aluminum, it looks very strong, it doesn't deform, it's very easy to load, I think it's a great product.

It was not too difficult to assemble. It just so many parts and screws. Once it was assembled it look ok. We had to reinforce it with plywood. The wheelchair wheels would get stuck when putting it on there. Then the chair seemed to heavy as it leans a little to close to the ground. The rod holding it could have been shorter to stabilize the weight.Not a good buy for us.

My nephew assembled the carrier in about an hour and all the parts were there. I am going to check into a stabilizer because it's very wobbly. I wouldn't want to be in freeway traffic until I see if it can be made not to wobble so much. It is very lightweight since it's made of aluminum so I have no problem raising or lowering the ramp. Longevity remains to be seen.Additional comments: It is difficult getting my scooter up the ramp because the distance between each cross piece is just enough that the wheels of my scooter lose traction and just spin. I am basically having to push it up on the platform. This has made it impossible for me to load by myself. I am going to have a more solid surface built to go on the ramp which will add to the weight. I wish I had never purchased this item and had opted for another item.

This is a nice unit. Sturdy and relatively lightweight. I used it to carry my lawnmower washer and dryer and … no problem at all. Worked well . Absolutely recommend.