🚗 Elevate Your Ride with KOYO Precision!
The New Koyo Idler Pulley Bearing 6302RMX is an authentic, high-performance bearing designed specifically for Toyota and Lexus vehicles. Manufactured in Japan, this bearing promises reliability and durability, ensuring smooth operation and reduced friction. Plus, with same-day shipping, you can get back on the road in no time!
C**S
Bearings are direct replacement for 2003-2009 4runner pulley bearings
These bearings are direct replacements for the idler pulleys on the 03-09 toyota 4runners, fj cruisers and 2nd/3rd gen tacomas with the 1grfe.All that you need to do is use a ball joint press kit, using the smallest recieving cup on the face of the pulley, then press the bearing out by ratcheting or impacting the end of the press(vice). To install, you seat the new bearing with a hammer and either a 32mm or a 1⅛inch socket. Then you put the reverse the pulley so that the face of the bearing is up (I did this without the recieving cup beneath the pulley as it kept causing the idler pulley to sit off center) Then use the 32mm socket on the end of the threaded section of the press tool between the end of the threaded piece and the bearing face. This set up will allow you to seat the bearing properly. Air tools can be used for this part however a 1/2" ratchet will do it as well. If you seat the bearing and it will not spin then flip the pulley over as if to remove the bearing in the press, give it a 1/8-1/4 turn pressing the bearing out and it will free the bearing up and allow it to spin freely.Take your time and this method will save you a ton of money versus buying new pulleys every time the bearings fail
C**K
OEM Part
OEM exact part for a 2007 Camry SE. I removed the pulley and popped out the bearing assembly then press fitted this new one in and then re-installed the bearing. The dealership wanted $81.99 plus tax for a new pulley with bearing. But buying this with a little elbow grease makes this a winner!
A**R
Exactly same bearing as OEM for the pulley on my Tacoma
Exact bearing as oem for the Tacoma pulley.
J**.
Better Quality than Gates due to center bearing boss
Press out of idler housing and pressed in - like new. OEM quality without paying for new belt housing. Lexus RX350 2007 model with 186K on it
D**N
Perfect for the Toyota 4.0 V6
Perfect OEM replacement bearings for the serpentine idler pulleys #1 and #2 on the Toyota 4.0 liter V6 4Runner; you'll need four all together.
M**Y
Perfect to repair idler wheels on Toyota v6
Exact fit
A**R
Smooth
Ridding smooth
L**N
No tienen un buen servicio, no es confiable
Solo me enviaron un bearing y pagué por 2, tuve que hacer un reclamo porque pasaron las 48 horas y no me respondieron los correos, muy mala atención y servicio por lo que no los puedo recomendar y valorar bien
Trustpilot
2 weeks ago
3 weeks ago
