Acubase 1700mm Front Side Bath Panel, Waterproof, Modern Panels for Bathroom Bathtub- White

Excellent bath panel with a some flexibility but not floppy or flimsy. Very glossy finish which is easy to keep clean.Easy to cut if required, I used a craft knife and a few slow steady cuts to keep the accuracy up and the possible dust down.It took a little bit of repeat measuring and fiddling to get the right fit between the upper and lower panel to suit my room but on the very plus side I could adjust it suit, unlike the panels I had before.The description includes the term MDF but it seems 100% closed cellular plastic material and no MDF, to me, which is a positive thing since it won’t ‘blow’ if it gets wet. I did seal the cut edges anyway.There are no instructions on how to fix the panel to the bath support frame and research on the topic gave a number of options from easy but ugly through various refinements to the complex but pleasing. The product is very easy to attach to with screws so I went for concealed magnetic catches which gives a very clean finish and the option to remove the panel for maintenance if required.If you have a single flat panel right now a bit of adaptation of the support frame is required to accommodate the two panel design. Totally do-able for the average DIYer or better.Super happy with the result.

Bought this for rental property because it is waterproof. 15 mm thick and quite heavy. It doesn't flex and easy to trim with a jigsaw and a metal blade which gives a good finish. Better than MDF laminated panels which are not waterproof.

This is a good quality, and fairly heavy bath panel. As other reviewers have said, the waterproofing is good - it’s of solid plastic construction and therefore no MDF to blow. Gloss finish is good quality and matches bathroom finishes well.Arrived quickly, seemed well packaged but one corner of the bath panel was dented - but thankfully was able to cut this away as part of fitting.Decent product from a reliable seller - thank you.

Be careful when ordering you must order the waterproof panel because this is made of a solid foam plastic with a shiny white front. It is in 2 pieces which allows you to vary the height of the panel. To fix the panel I just drilled holes straight through the panel and screwed it to wooden battens on the bath and floor. I then just bought white screw caps to cover the fixings. This is completely waterproof and will not delaminated. Just beware you don't buy the cheaper option as this is made of MDF and over time that will soak water and split. Once again make sure to order the waterproof option. One last thing this panel is brilliant and it is rock solid as it is about 12mm thick but you can shape it to the shape of your bath panel.

As the title says, not an easy install but a good quality product at least.In the box, you get 2 bits of wood (plinth and panel), some screws and some 90 degree brackets.The 'instructions' if you can call them that are basically: fit the panel - useless.You don't want to use screws to install this panel, you'll compromise the water proof coating imho.Instead, you'll need to install 2 vertical batons below the bath to flush glue the panel too.To attach the plinth the the panel, I used heavy duty Gorilla Glue: https://www.amazon.co.uk/HD-Grab-Adhesive-200ml-Tube/dp/B0BN696JKB/ and left if clamped for 4 hours.Next, I ran a bead of bathroom silicon sealant along the back edge of the plinthUsing the same glue, I then fitted and stuck the panel to the previously installed batons.Finally, I ran more sealant around the edges and bottom.

Really nice panel and water resistant, but these panels are not always straight forward to secure back so it doesn’t come with any type of securing fixings, only corner brackets, would use again

Also arrived damaged, can tell this was from where the fixings were packaged inside the main package.

Very happy with this purchase to go in new white / grey bathroom good weight sturdy white high gloss finish brings bath panel into the future from the old flimsy plastic ones we used to have, cleverly made with a high density material that is completely waterproof.Thank you