Supersub Smart Electric Bilge Pump - for Fresh or Salt Water Use

Minimum height with hose outlet turned sideways is 2 inches, without the angled base. The height with the included angle base (lowers the suction head) is 2 1/2 inches, or 1/2" more with the angle base. Good enough for our Sailboat, below the floor boards. If you don't have 2 inches, get the 500 GPM, like the one we replaced after 8 years, which had started squeaking.

Installing this thing in my engine sump under the engine in my sailboat was a chore but it works great and sucks nearly all the water out if installed at the proper angle. It took me a couple times to get it right using only one eye and three fingers.The one way valve worked better than expected and keeps the water from flowing back into the bilge. The auto function works flawlessly.

I have tried all the common types of bilge pumps and thought I would give this brand a try as I was having trouble getting enough lift in my deep keel sailboat. It did not work from the getgo. The automatic function did not work at all and with the 1/2" hose it could not lift water 3' to the outlet. I had to use the 3/8" to get it to pump at all. Then after a week or so it quit altogether. Won't even pump with no hose on it.

This pump is very well designed, Made of good quality plastic and you can install itAlmost every angle and direction you like. I had managed to install it inMy kayak there is really limited installation option.when I turned it on i got surprised by its strong currentthat pump is working great and does the job quickly with muffled noiseLike a heavy duty servo. the electronic sensor is excellentThis is why I bought it, since I burned my previous pumpand i was Looking for an other suitable solution.(there is no place for floating switch, etc in a kayak)I think this is one of the best purchases I made this year.

Compact size makes this ideal in bilge under engine. Automatic pump feature relies on sensor being vertical so make sure when placed it is totally upright.I would by again

Worked on my scarab 165 boat. Easy install

This was a direct replacement for the bilge pump in our 2013 MasterCraft. Easy to install and exactly as expected.

slim design makes for an easy install, but water does not pump out very far from hull

good pump

My opinion is, as with almost all reviews, subjective but I strongly believe that this is one of the best bilge pumps you can buy. And.... it's good value for money.For those who don't know what it is used for: to pump water that comes into a boat via the propeller shaft out of that boat. When you grease the space between the shaft and the shaft channel properly, then not a lot of water should come in. The bilge is the area where the water is collected, the pump lays on the floor and will start pumping as soon as it detects water.

Molto buona

die pumpe ist ein super gerät kann ich jedem empfehlen

Entwässerung Bilge Segelboot.