🔔 Make Some Noise with Style!
The Kleinn Air Horns 318 Detonator features a powerful 1" diameter horn, designed for easy installation with a 7/8" hole, and comes equipped with dual post screw terminals for versatile connectivity. Perfect for those who want to make a bold statement on the road!
M**K
Air horn button
Works perfect!
P**C
Stout little momentary horn switch
Stout little horn switch. The threads on the barrel, bezel nut, and backing nut are very fine and not all that deep as others have noted. Hopefully they will hold up to years of use. The rear contacts are brass with fine pitch screws to either attach crimp terminal connectors, or alternately place bare twisted wire inside the brass blocks (visible in the product image) and tighten down the clamping screws. The screws on the switch we received were properly tapped/threaded.The momentary switch works as follows, as the button is pushed, a phenolic separator that holds the internal copper contacts apart has a rivet contact on (mid point) it that (when button is depressed) is allowed to contact the copper contacts, thereby actuating the horn (or other attached device). when the horn button is allowed to return to its un-depressed position the copper contacts are again separated by the phenolic separator
J**N
Name brand
Shipped fast functions great, just not top tier quality.
M**S
It works
Works just fine. Button is not a true red color. Has orange in it. Seems to function as it's supposed to.
J**R
Big but well made
It is big. You have to drill a 1” hole in your dash to mount it. But the screw terminals on the back provide very positive connections and the button operates well
E**C
Works GREAT!! Looks great on my switch post among ...
Works GREAT!! Looks great on my switch post among the others. Easier to reach than the below dash switch I first had installed. Red "target" spot is easy to see and get to when needed. Would recommend and buy again.
S**C
Works as described
Used it as a horn button on my boat. Works great!
L**H
Also the large nut used to secure the switch from behind is a very poor fit for the super fine molded in threads on ...
This switch arrived in a Plastic zip lock bag and i noticed that one of the screws that secured the wires was loose in the packaging. When i tried to use it the screw would not tighten to secure the wire. The threads in the brass were stripped. Also the large nut used to secure the switch from behind is a very poor fit for the super fine molded in threads on this switch. The worst attribute of this switch is that the spring tension is very high. This makes the usability of this switch very poor. It would take a very deliberate and well centered push to make contact. To be used as a horn switch and signal a courtesy (beep beep) to a passing neighbor would be difficult. When connected to a meter i found that the switch did not make contact until nearly completely depressed, again not ideal for a horn.
D**.
Interrupteur solide
Interrupteur de construction solide et fonctionne très bien.
Trustpilot
1 day ago
1 month ago