S-UnionInternal Cooling Fan,Suitable for Sony Playstation 4 PS4 CUH-12XX CUH-1200 CUH-1200AB01 CUH-1200AB02 CUH-1215A CUH-1215B Series

would definitely recommend great price does the job fixed my overheating ps4 slightly a bit loud but other than that great product and worth the price

Very easy to install. My PlayStation 4 fan was not spinning properly and overheated so system shutdown itself. New fan sounds quiet. Thanks for the screwdrivers and Thermal paste for the heatsink. Would recommend buying.

This item was not a good quality at all fan was vwry noisy and overheating very quickly it burned my ps4 fan stand and melted the plastic of the housing do not buy this i warned you amaxone just refunded me the money not the damaged caused from this fan so i never buy anything from thdm again better order from well known seller to svoid this hussell

Ordered the correct fan, with correct power cable connector and size. Metal frame bracket had the wires hooked to one of the thick stems, and didn't have the thinner stem at an angle (which is shown in the picture) which meant having to unthread the cable and work a solution to affix, connect, and ensure cable doesn't catch the fan. Easy enough to do, but would have preferred to have the design as displayed.Fitting the unit was easy enough, and the Torx drivers and thermal paste ensure you have all the kit you need to confidently follow one of the many helpful guides online.PS4 powered up and runs great again - with the added benefit of having also had a good clean-out, reducing the noise significantly (completely forgot how much quieter the system can be after hearing it whirring like a jet engine for so long).

Not easy to fit if you are not confident in completely stripping your Playstation down. Fitted without any issue and the Playstation went from sounding like a plane taking off to being almost completely silent.I warn that it is a lot of work to install, but it is not difficult and there are plenty of videos on the internet to guide you. Note down the screws as you remove them (pushing them through a piece of paper to keep the order can save a lot of confusion when putting it back together). Also take a few pictures as you go along so you remember to connect all the wires.

All I can say is im glad this wasn't for my own system. It does the job and it cooling well, as you can tell from the hot air coming from the system, but I wouldn't be happy with it. The noise level from this is rather distracting. It didn't fit as well as the original, I had to use a little force to get the guide posts into it the connector didn't snap is as secure as I'd like but, again, it's doing the job. Not worth the price though seeing as I usually get original ones for about 15-20 but low stock made me have to buy this one.

Does what it’s supposed to do, cools the unit down

Good easy to install good quality has lasted years

Fläkten passar inte till det gamla systemet

Photo et produit identique à la livraison et fonctionne nickel 👍

Purtroppo il prodotto in questione non è preciso i fori di incastro al case non sono uguali infatti nel montaggio si è rotto un supporto di plastica e una volta provata (evidentemente più alta dell'originale ) tocca sotto lacciando un rumore pazzesco ho rimontato la sua originale .

No es compatible con el Playstation 4 Pro y no me dejan hacer la devolución.

Recieved a new fan, 2 torque drivers, and thermal paste. Only other tool need was a small Phillips screwdriver. A very small flathead screwdriver and small needle nose pliers came in handy but not necessary. Basically had to completely take the PS4 apart, only the CD rom player was not removed. I washed all plastic only parts, and the heatsink, down with hot water to remove dust, lightly blew off electrical parts with air. The anti-vibration pads on the bottom of the old fan need to be transferred to the new fan. Was enough sticky residue left over but a little crazy glue would have ensured. Upon power up controller had to be very close to the PS4 to work and then unit shut down, red light on unit. Opened unit and found I forgot to tighten down Phillips screws that pull down heatsink to processor, very important to make sure the, 2 tab steel bracket is flipped to proper side. I also reseated the antenna wire, single black wire under the power supply and adjusted the steel antenna bracket. Powered up a second time, works great!.No controller issues and runs as silent as can be! Great product. Tip, take pictures as you go before you remove each piece and after.