Glarks 95Pcs Zinc Alloy Hex Flanged Screw-in Nut Hex Socket Drive Threaded Insert Nuts Assortment Set for Wood Furniture

Haven't used yet but seems like a good product from looking at them.

I had seen these used on TV by woodworkers. They are everything they seemed to be. Easy way to add threads to a wood working project. Will purchase again for sure.

Used these to replace stripped out weak furniture screws for some kitchen chairs and they are way stronger than the screws that came with the chairs. Chairs are like new!

Pieces are a little rough (some burs) on threads (inner more than outer). Drill bit sizing suggestions would be helpful, ended up having to try several odd sizes to find a good match up. Straight barrel and hex key allows for easy installation. Packaging left a little to be desired. Bin separators came undone during shipping. All pieces were jumbled together in the plastic box. (similar to other products from the same company/packaging)

The hardware itself seems fine, but the M10 bolts I have don't fit into the 10mm inserts. My 6m and 8m bolts fit into the 6m and 8m inserts just fine.The case arrived cracked, and the inserts had gotten out of their bins; I had to resort them. The case was salvagable but the plastic is super thin and chintzy. They should have spent a few cents more and provided a thicker plastic case.The label that lists the contents and shows what size inserts are in which case area isn't affixed to the box; it's just floating around loose. So I have to spend additional time gluing it myself the case which is lazy on their part.The M6 and M8 inserts themselves seem solid and good (havn't tried yet). M10's are useless with my M10 bolts.If you just need the M6 and M8's, probably worth it.

If you move a lot and want to be able to disassemble your furniture repeatedly, this is a must-have kit. Replace your regular screw holes with these things, and buy some metric screws, and you can take apart your furniture as many times as you want!

Do these work? Yes, but only barely. You'll run into two problems:- They're really hard to get started straight- The outer threads are not sharp enough to bite into the wood, unless it's *very* soft wood. You'll have no success getting these into hardwoods, and it will be hard with some kinds of softwoods as well.If you just want an assortment for shop projects, this is probably fine. But if you're trying to build something a bit nicer, do yourself a favor and get something better, ideally with an installation tool and the right drill bit. I've had a lot of success with the EZ-Lok brand.

First, the numbers for each different size seem rather random. I mean there are 5 of one of them, but whatever. There are no directions. Now, I don’t really need directions to use them, except they should tell you which drill bit to use for each size.Unfortunately, I need a size is between two that I have a (one is too small and the other too large). I suppose the bits need to be metric, but it doesn’t say that either. All it says is to drill a well sized hole. What does that even mean? I probably won’t purchase from them again.

Bonjour aucun problème rencontrez-vous pour mettre des roulette à une ancienne table

Good product

Les inserts font le job. Dommage manque clé pour visser insert

Bought these to replace the ones in my dining room table which had been stripped. Worked perfectly and were actually surprisingly much higher quality than the original ones in the table. Would buy again, but I got do many in the set that I don't think I'll need to.

very good quality kit, only needed 2 screws to fix the job, but very handy having various sizes as did not know which size needed till i started the job. very good tight fixing and very easy to screw into wood as you use Allen key to tighten the wood tread.