Alloy USA Ball Joint Kit for Jeep Wrangler/Cherokee | Heavy Duty, 2 Upper & 2 Lower Ball Joints | 11800 | Fits 2007-2018 Jeep Wrangler JK/JKU; 1999-2004 Jeep Grand Cherokee

My 2010 Jeep wrangler was having a dead wobble when going to a bump at 50+ MPH. Then I decided to purchase these balljoints, oh man, they seem to be strong and hold the tires (285/65/18 mud tires) together well. So far 5 months and I don't have any issues with these balljoints as yet. I have been riding on medium and mild trails for about 6 times and the ballpoints are still good. I also put on another 10,000 miles on these balljoints, and no signs of getting dead wobbles anytime soon. Recommend these balljoints for Jeep with bigger tires.

Exact replacement on 2002 Grand Cherokee. Angled grease fitting is great. No need to remove axle shaft to grease for maintenance.

The stock ball joints (all four) on my Rubicon were shot after 20000 on and off-road miles. I was experiencing the infamous Death Wobble on an intermittent basis. I ordered these after reading many good reviews and after seeing that Amazon price was the lowest.Would have given the parts 5 stars, but had to drop it down to 4 because of poor packaging. One of the upper ball joints had damaged threads that I was able to repair by chasing threads with a die.Parts come with very good install instructions.Installation and Reassembly went with no problems and Jeep steering/handling greatly improved. No more Death Wobble!!

I bought these to replace the original set of ball joints on my JK. These looked well made and were each in their own plastic baggies with red rubber boots, new cotter pins, new castle nuts and grease fitting. The fit is spot on and once installed these work as well or better than stock. I had no issues with steering and they seemed to require little to no break in.I would absolutely buy these again, especially for the money.My buddy bought a set of Synergy ball joint for his JK and other than the color of the rubber boot these appear almost identical.

Update: All four are trashed. Went back to read the limited five year warranty and in order to even attempt to use the warranty you must first purchase another set at $200 with no guarantee of replacement. Well money in hand I doubt that’s going to happen and then I’m stuck with another set that won’t last 3 years.Replaced factory ball joints with some fairly inexpensive ball joints also offered on Amazon. Those failed rather quickly if not immediately. I was hesitant to trust any ball joint after that fiasco especially since the listing stated a 1 year warranty which did not exist. The next price point above these was around a $200 jump. The difference after installing these Alloy USA ball joints was night and day! Further confirming that the quality of the other set was poor to non existent. These along with a new track bar bushing made my death wobble experience disappear. Steering is now surprisingly tight and the overall ride of my jeep is like I never remembered it being. Great product for 200 bucks, no need to spend $400 plus plus for the next tier. Great Job Alloy USA! TIP: Make sure to get a ball joint press that has the Jeep/Dodge 4x4 adapter for the offset angle. Otherwise you may never get them seated correctly. Advance Auto has the set which includes this adapter as a loaner tool.

Got these for my 2008 Wrangler CRD and they work great, a vast improvement over the stock ball joints which were badly worn at 25k miles. The only issue with them is the low profile zerk on the lowers, I swapped them out for standard zerks and there is enough room so it's all good, apart from the royal pita of fitting the ball joints as the originals were seized solid into the housing and were truly horrible to get out.

I have an '07 JKU with lift and 35" tires. My stock ball joints have been bad for a very long time, I've just been putting off replacing the ball joints. Then one day on Jkowners.com, someone posted a link to this Amazon page, and the great price on these Alloy USA ball joints. That convinced me that it was time. Ordered the ball joints, and then took my JK to a local shop- I'm willing to do most the work on my JK, but installing ball joints is not one I care to mess with. These fit with no problems at all. And now I'm enjoying the "like new" feel of driving my jeep without the constant issues related to the bad ball joints.

These only lasted around 1 year before they were completley wore out. I was running 33s for most of the use of these and 35s for about 4 months before they went out.

Bonne qualité reste a voir la durabilité mais a date sa me semble un très bon produit !!! Merci !!

i moved from 32" tires to 35" tires and i decided to change them because might as well since the factory ones is going to go bad .so its been almost 6 months and i dont have any issues so far just make sure to keep it greased.

The ball joints overall fit perfectly in my 2007 Rubicon and have really tightened up the front end. This was the best price I could find and I'm happy with the purchase. The kit did not come with the needle grease fitting that you require for the lowers, otherwise would have been 5 stars. The needle fitting you require has kind of a blunt tip on it, and you don't want anything like an adapter that is spring loaded, you want the type of needle fitting that screws directly into the grease gun.

Just installed!!!! Seem a bit bigger in the hole than the stock one but got them im pretty good havent drove yet

These Ball Joints lasted less that 2000KM and failed!