NEIKO 01924A 3-in-1 Automatic Wire Stripper, Cutter, and Crimping Tool, Auto Self-Adjusting Pliers That Cut up to 10 AWG

Don't know how I managed for so long without these. They are extremely efficient and save huge amounts of time on wiring jobs. They even strip the outer sleeving off flex or power cable while leaving the wire underneath completely unharmed. Time taken to strip a flex and the insulation on the conductors is about 10 seconds if you are not in a hurry

Very good well made tool. It strips fine wire and larger cables neatly and accurately. Don't fiddle around with side cutters or knives buy this tool - you will not regret it.

At last a stripper that a man can be proud to own. Does the job in no time and adjusts to any size!

Excellent product 👌

Quede satisfecho con la herramienta, es de buena calidad y funciona muy bien, y ofrece buena relación precio-calidad.

good product

Outstanding strippers. I was skeptical at first, but now have used for 2 months and without adjusting the tension screw at all I've stripped dozens of 12-14 gauge romex wires, and many dozens of solid/stranded 28 ga up to 18 ga. I've found you can stick 2 wires (18 ga and smaller that is) in at once and strip both at same time. Cutter works good, and have used the crimper a couple of times and it makes a proper crimp that curls both side of the metal sleeve inwards properly instead of just crushing it flat like standard cheap strippers. Soft "rubber" on handles is nice and "grippy", and long handles give a good leverage. The only problem I have had is one type of romex (10 ga) that had an additional clear, hard, slippery outer coating over the insulation. I had to adjust the tension tighter to get the cutter to bite through this tough outer coating, but normal romex was fine.

Las encontré en muy buen precio, tiene buena construcción, son solidad y tiene buen agarre, las pinzas funcionan bien, pelan bien los cables.

Before getting this tool, I have been stripping wires with a utility knife. It usually works, though sometimes it cuts too deep and cuts through inner wires of multi-wire cables like CAT5, or stranded wire and some strands get cut off. It's time consuming to strip wire this way.I finally broke down and got one of these. Wow! It makes stripping wires fast, easy, accurate, and repeatable. I tried it on solid and stranded wire from #14 house wire to the stranded wires inside CAT5 - all fast and flawless. An adjustable strip gauge is perfect for when having a repeatable strip for a critical length. The crimper and cutter are just more gravy.Basically, it seems to do everything it's supposed to do, and does it well. So what about the things it does NOT supposed to do? I tried it on the PVC casing of 3-wire #14 house wire. It doesn't fit into the jaws, so obviously that does not work. But it does strip the wires inside. I tried some very thin stranded hookup wire with a tough, slippery outside, and it could not get a purchase on that. These are the only things I have found so far that it could not do, and after all, it is not advertised to do these things.I tried it with the casing of CAT5. Flawless, and no damage to the wires inside; strips the stranded wire inside just fine too. Old 4-wire telephone cable: perfect, and it can strip the small gauge solid wire inside. I tried a thin shielded cable (just a bit more than an eighth of an inch thick) and it was able to take off the outside jacket.That speaker wire with the clear casing? Works as expected, but it can also strip both conductors at once (suggest that you split them first, which is easier than after stripping). It can strip both conductors at once for medium-gauge AC appliance wire.I'll update this report with results of trying CATV cable, other large-gauge shielded cable, and anything else I can find around.I'm very happy with this purchase, and only wish I had bought one years ago.