A-Premium Set of 4PCS Mud Flaps Splash Guards Mudguards Mudflaps with Hardware Accessories Compatible with Cadillac SRX, 2010-2015, Sport Utility, Black, Front and Rear (Driver & Passenger Sides)

These come with NO INSTRUCTIONS, NONE, ZILCH. So you have to figure out what the included hardware is for and where to use it. The backs go on using the existing fasteners. All the hole line up perfectly, but the working space is very tight between the tire and wheelwell. The fronts are a bit more challenging. I had to drill two holes for each. There is a slot on the bottom for another hole, but I didn't use it because there is no way to get the clip installed. It is very sturdy with the three screws going into the wheelwell frame. They look very nice and you can't beat the price.

They fit great. Easy to put on and they look great. Very happy with product.

I was a little skeptical when I ordered these mudguards for my CT5. I had planned on getting the mud guards from Cadillac only to find that they were discontinued. I took a look at these and thought I might as well give them a try. These were a little over $40 for the set of four while the guards from Cadillac would have been about $280. I thought that the guards from A-Premium might be a more generic type of guard but I was wrong....they do fit really nice! The rear guards use all of the screws that are already in place in the car's fenders. All you need is a torx driver that is short enough to remove and then replace the torx screws to hold the guards in place. A short driver of some sort is key here so you don't have to remove the wheel. I just got a set of torx drivers that resemble a set of "L" shaped hex keys to do the job. The front guards are a little more difficult. There is one plastic sort of pop rivet that can be removed with a screwdriver and then replaced to hold the guard. I did drill a small hole through the lip of the fender near the top of the guard and then used one of the supplied clips and screw on each front guard. I hate drilling holes in a new car but found that this was the best option. There is also another hole in the guard underneath but since the guard already seemed very solid, I didn't use it. All in all I would have to say I'm quite satisfied with these mud guards and would definitely buy them again.

They fit the contours of car fenders perfectly. They also do an important job, especially with the horrendous roads around here, always broken and loose gravel in areas.The one thing I'm not extremely pleased with is, they're somewhat hollow. That means looking at them from front angle, you see the "scoop" portion within the flaps. They're not closed off & smooth behind the tires, like ones I've seen on other types of cars. However, they do their job protecting the car & there aren't better ones available specifically made for this car. It's a gorgeous Caddy so looks ARE important! I recommend.

After seeing manufacturer OEM price point, opted to try this product. We had them professionally installed to avoid making errors in drilling positions. We’re pleased with the final look of these items as they will help protect the cars finish from splashes/road debris. They hug the contours of the body like a glove. Would recommend as an alternative to OEM.

several of the holes in the mudflaps were off by 1 inch or more

So I’ll give these 3 stars, for the price they seem pretty sturdy.I deducted 2 stars because 1) these will not fit the XT5 Luxury’s rear well. 2) these are not simple plug and play, as others stated you do have to drill into your existing trim to properly secure them.As others mentioned, those dugout pieces are UGLY. Like, very ugly. Not sure why they’re created like this other than being slightly cheaper to produce.I don’t think I would recommend them but if it’s this vs hundreds at the dealership, it’s hard to walk away.Wish they fit my car!

Fit my 2015 srx perfect

Fit perfectly. On the back you take out two Torx 15 screws out from the inner fender liner, then one Torx 15 screw underneath. In the front you take out one fender liner grommet….then on the bottom I used a screw that I had on hand…which is smaller than the ones that are sent in the package…and the smaller screw just fit perfect into the hole in the rivet underneath. That was it. Very quick install. Happy with results.

I bought these mudflaps for my 2019 Cadillac XT4 and they were a perfect fit. All 3 holes lined up with car screws on the back ones, the front ones only had 1 screw hole line up but they were very easy to put the remaining screws in, I just used self tapping metal screws.

Nobody had a picture of these installed, so here ya go. They do what they’re supposed to, easy installation, I was missing a few screws from factory so a few drilled holes and Christmas tree fasteners and all is good. They fit, not a factory fit but they do what they need to

Perfect fit, small, looks great

These are good for the money. They fit good and look good. OME ones would cost 4x that, they just don’t make them. These are good if you want something. I put them on my Blackwing and they match the carbon fibre pretty good I’d say.