DongarDashcam Power Adapter (10-pin Type B). Compatible with Select Toyota, Lexus, Subaru Models. Connects to Rearview Mirror, Built-in USB Power Source, Easy to Install

Great product! Made providing power to my dash cam so much easier than other methods. Highly recommended! 😊

I got this to connect my VIOFO A119 mini to my 22 Outback wilderness and it was perfect.The product feels well made. The wires are shrink wrapped well and the connectors are all securely attached. There’s an adhesive pad on the side of the USB port that sticks well to prevent that module from dangling. This also came with three cables, I ended up using the USB Type A to Type C for my dash cam. The cables that came with my cam were either too long or too short.Install was a breeze:1) remove the plastic trim piece between the overhead console and the auto-dimming rear view mirror.2) unplug the rear view mirror3) plug the Dongar dongle into the mirror and then plug the original pigtail into the Dongar dongle.4) push the excess length of the original pigtail into the hole leading to the overhead console.5)replace the trim piece, routing your USB plug accordingly6) stick the USB plug where you’d like with the included adhesive pad7) plug in the dash camThe Dongar setup took me less than 5 minutes. It required zero tools and I did not need to remove any consoles or panels. The plastic trim between the mirror and console can be removed easily with your fingers.Note: this will only power your cam while your car is on. If you want parking mode then this isn’t the option for you.

Lo usamos en una Cotilla cross 2022 y una tundra 2024 para unas dashcam y funciona excelente

It took me about 30 minutes to install a new Viofo dash cam in my 2024 Toyota RAV4 Prime using this Dongar cable. About 20 minutes of that was me trying to figure out how to get the plastic shroud off the rear-view mirror enclosure. I have installed dash cams in multiple vehicles over the years. I've never had such an easy option of tapping into the power at the rear-view mirror. It was soooo much easier and cleaner than having to run a long USB cable down the A-pillar and under the dash. Thank you Dongar for making this adapater!

This is an awesome product, making for a really clean install of a dash cam in our 2012 GX460. Wish I’d known about these when I installed my dash cam in our Land Cruiser (I snaked the cable through the a pillar and dash). Plugs into the power source for your mirror, without robbing any power/function from them. Really nice. Kinda pricey for what it is, but I’m so happy with this solution that I’d pay for it again.

I wanted closer to mirror power for my radar detector in my 2024 Crosstrek and this did it.double check your pin count but this was EASY to install and only needed what was included and a heavier Phillips head screwdriver. VERY easy to install and now when I start my car the USB device powers right up. In my case I have a USB to RJ11 adapter cable I to this for my radar detector. No more long cable hanging from the windows and down center console. There was plenty of space inside the headliner to tuck the slack away for a nice install I can only see a foot and a half of cable now instead of having it all down the front and to rear of center console. I wish There was a longer one for door panels for some additional 12v power sockets but there are other companies that make those too. Subaru should have included more power sockets than 2 in the Crosstrek but this helped immensely for the front. I put a Y splitter on it and it powers up my USB iPad click wheel too.

Most scary part was snapping off the cover for my car. Surprised at how much length it had

So simple. I installed mine in my 2024 4Runner. I undid the upper console and pushed my wires down to the mirror and plug from that end. I dry fit my camera and wanted to test my connection for power. I was scared when the so far didn’t power up. But. I reconnected the overhead console plug, and it must have completed the circuit. So we had power. I buttoned it all up and taped my USB next to the mirror cover and mounted the Garmin mini 3 behind the mirror. You can’t even see the camera and if you aren’t looking for it, you don’t even notice the so far at all. Super happy with the install and that it is so dang clean.